 Envelope detector

An envelope detector extracts the slowly varying nonnegative wave envelope of a rapid carrier wave. In a simple electrical version a diode charges a capacitor near positive carrier peaks and an attached resistor discharges it between peaks. When $0\le m<1$, ideal envelope extraction gives $E(t)=A[1+m\cos (\Omega t)]$; removing the constant $A$ leaves $Am\cos (\Omega t)$. This permits recovery without a synchronized carrier reference. Carrier injection thus trades transmitted power for simplicity.^[ref]

A working peak detector needs margins as well as $m<1$: $E_{\min }=A(1-m)$ should comfortably exceed the diode's forward-voltage scale and noise, and the time constant $\tau =RC$ must suppress carrier ripple while following a falling wave envelope. The coarse scale window isA time constant that is too short leaves carrier ripple; one that is too long makes the discharging capacitor fall more slowly than the envelope. In the ideal zero-drop, continuous-tracking approximation, following a falling $E$ requires $E/\tau \ge -E^{\prime }$. For $0<m<1$,Differentiating the ratio locates its maximum at $\cos \theta =-m$. This original slope check explains why operation near $m=1$ is demanding even before overmodulation: the upper bound tends to zero while the need to smooth carrier cycles persists. It is an approximate circuit criterion, not a guarantee in the presence of diode drops, loading or noise. At $m=0$ there is no varying message to track; at $m=1$ ideal envelope extraction remains algebraically possible, but the simple detector has no positive trough margin.

For $m>1$, even an ideal noiseless envelope detector returns $A|q(t)|$. Removing its mean or its original offset cannot restore the discarded sign. A more elaborate receiver can use the retained wave phase through coherent demodulation.