 Gear contact duration

Gear contact duration is the time for a specified tooth pair to traverse its active gear path of contact. For a fixed-axis external spur gear pair at constant speed, the contact location advances along the gear line of action at the common gear base-roll speedThis is the speed of the contact location along a geometric line, not the relative tooth-surface gear sliding velocity. The latter vanishes at the gear pitch point, while the contact location continues moving. For active path length $L$, duration is $T=L/u_b$. The geometry relates gear contact ratio to active path length divided by gear base pitch.^[ref]

The time between successive tooth-pair entries is $1/f_m$, with gear mesh frequency $f_m=N_1|{\omega }_1|/(2\pi )$. Since $r_{b1}=r_{w1}\cos {\alpha }_w$ for compatible operating geometry, the base-circle distance advanced per entry isConsequentlyA contact ratio above1 means one pair remains engaged after the next pair enters; it does not mean one pair contacts for an entire shaft revolution.

For the standard module2,20/40-tooth example with20degree reference angle, active length is9.65457mm and base pitch is5.90426mm. At driving angular velocity $50rad/s$, $u_b=0.93969m/s$, $f_m\approx 159.155\mathrm{Hz}$ and $T\approx 10.2742\mathrm{ms}$. The entry interval is6.28319ms, giving $T{f}_m\approx 1.63519$. Doubling both shaft speeds halves duration while preserving geometric gear contact ratio. Variable speed requires integrating the changing base-roll speed; a helical gear also needs a stated transverse slice or a whole-face contact convention.