 Gear contact ratio

Gear contact ratio measures how much successive tooth engagements overlap. For an external spur gear pair, its transverse value iswhere $L$ is usable gear path of contact length along the gear line of action and $p_b$ is gear base pitch. One tooth pair remains engaged while contact advances through length $L$; successive pairs begin after an advance of $p_b$. Thus ${ϵ}_{\alpha }$ is also the ideal mean number of tooth pairs simultaneously engaged.^[ref]

For a tip-limited, noninterfering external involute pair with tip radii $r_{a1},r_{a2}$, base radii $r_{b1},r_{b2}$, axis separation $a$ and operating pressure angle ${\alpha }_w$, right-triangle geometry givesFor an original example, use module $2\mathrm{mm}$, tooth counts 20 and 40, reference angle $20{}^{\circ }$ and standard separation $60\mathrm{mm}$. With tip radii $22$ and $42\mathrm{mm}$, the formula gives $L\approx 9.6546\mathrm{mm}$ and $p_b\approx 5.9043\mathrm{mm}$, hence ${ϵ}_{\alpha }\approx 1.6352$.

In the ideal periodic timing model, two tooth pairs are engaged for about $63.52\%$ of a tooth-passage period and one pair for about $36.48\%$. This does not mean that force is divided equally between engaged pairs: tooth flexibility and contact geometry affect load sharing. A value below one would leave gaps in ideal engagement, while a value exactly one leaves no overlap margin for tolerances and deformation.

The plot shows contact timing, rather than physical tooth shapes or force sharing. For helical gears, the transverse measure must additionally be distinguished from gear overlap ratio caused by the inclination of teeth across the gear face. Finally, real usable contact can be shortened by modified or unavailable flank portions; the tip-circle formula is conditional on its stated geometric assumptions.