 Gear overlap ratio

Gear overlap ratio measures the additional engagement overlap caused by a helical gear's tooth inclination across its gear face width. It is distinct from the transverse gear contact ratio, which measures contact length within one transverse section. For face width $b$, reference gear helix angle $\beta$ and gear normal module $m_n$,where $m_t$ is gear transverse module and $p_x$ is gear axial pitch.^[ref]

Unwrapping the reference cylinder explains the ratio: moving across axial width $b$ shifts the tooth pattern circumferentially by $b\tan |\beta |$. Dividing this shift by gear transverse pitch $\pi m_t$ counts how many tooth spacings the engagement progresses across the face.

For an original example, $b=20\mathrm{mm}$, $m_n=2\mathrm{mm}$ and $|\beta |=30{}^{\circ }$ giveDoubling the face width doubles this geometric overlap if the other parameters stay fixed. At the spur gear limit $\beta =0$, the overlap contribution tends to zero.

In the ideal cylindrical-helical model, total geometric contact ratio is the sum of transverse and axial contributions, ${ϵ}_{\gamma }={ϵ}_{\alpha }+{ϵ}_{\beta }$. This does not specify a uniform division of load: flexibility, alignment and the usable flank region affect actual contact. Increasing helix angle can improve overlap while also increasing gear axial force; increasing width also changes the alignment and support demands. These are related geometric tradeoffs, not a guarantee of a specified noise level or load capacity.