 Mechanical dynamic mass

Mechanical dynamic mass is the complex force-to-acceleration ratio $M_{\mathrm{dyn}}(s)=F(s)/A(s)$ for a stated mechanical excitation and response. It is the scalar reciprocal of mechanical accelerance where that response is nonzero. Its units are kilograms, but a supported structure need not have a real, positive or constant dynamic ratio. An impedance head supplies separate force and acceleration channels from which this response can be estimated.^[ref]

For $m\ddot{x}+c\dot{x}+kx=F$ with zero initial conditions,Equivalently, mechanical dynamic stiffness equals $s^2{M}_{\mathrm{dyn}}$. A freely translating ideal mass gives $M_{\mathrm{dyn}}=m$; a spring-supported mass includes the elastic and dissipative terms. With $m=2\mathrm{kg}$, $k=200N/m$ and $c=4\mathrm{N}s/m$, at $\omega =5rad/s$ the result is $(-6-0.8i)\mathrm{kg}$. At $10rad/s$ it is $-0.4i\mathrm{kg}$. The negative real part in the first case describes a restoring-force contribution relative to acceleration; it is not a negative quantity of material.

An impedance-head mass correction subtracts the effective moving mass below the force-sensing plane from the measured scalar dynamic ratio, provided that material shares the measured acceleration. This is a force-plane correction, not removal of the sensor's physical influence on the structure. At an antiresonance, a small response can produce a very large reciprocal ratio; dividing by a channel near its noise floor makes that estimate unreliable. With coupled measurement coordinates, exchanging complete force/acceleration descriptions requires a matrix inverse, rather than the reciprocal of each transfer entry.