 Optical frequency measurement with a comb

Mix an unknown single-frequency laser with a nearby comb tooth on a photodiode. Define the signed beat $b=f_L-f_n$, soThe beat arises from the cross term in light intensity:An electronic detector can follow this slow difference even though it cannot resolve either optical oscillation. The square-law expression also shows why a real-valued intensity trace by itself loses the sign of $b$. A small known upward shift of the chosen tooth decreases $|b|$ when the unknown lies above it and increases $|b|$ when it lies below, provided the tooth assignment remains unchanged.

For an original example, stipulateThen $f_n=500,000.020\mathrm{GHz}$ and $f_L=500,000.050\mathrm{GHz}$. Choosing the opposite sign would give $499,999.990\mathrm{GHz}$ instead. The stipulated optical frequency is countable because the large optical value is expressed using the integer $n$ and three electronic frequencies; the diagram's two controls establish the comb, and this additional beat places the unknown against it.

Both comb readouts use one calibrated microwave reference. Feedback fixes $f_r$ and $f_0$, determining each tooth once $n$ is identified. A frequency counter measures the slow beat, transferring the calibration to the optical frequency.^[ref]