Rumford's cannon-boring experiment
ID: rumford-s-cannon-boring-experiment
Rumford's cannon-boring experiment tested whether frictional heating could be explained as release of a finite store of caloric. In his 1798 paper, Count Rumford describes rotating gun-metal against a borer while enclosing the heated cylinder in a water-filled wooden box. In Experiment No. 3, the cylinder turned at about revolutions per minute, and the surrounding water boiled after hours minutes.[ref]
An inquiry concerning the source of the heat which is excited by friction by Benjamin Thompson. Experiment No. 3: water-tight box, rotation rate and temperature record
A separate control compared hot metal chips with thin strips cut from the same metal. Mixing equal masses into equal quantities of cold water gave nearly equal final temperatures, challenging an explanation based on a large change in specific heat capacity during cutting.[ref]
An inquiry concerning the source of the heat which is excited by friction by Benjamin Thompson. Opening metal-chip/strip calorimetry comparison and repeated trials
Continued mechanical input, rather than depletion of an evident material heat store, was the striking result. A modern quantitative energy balance must also include warming of the apparatus, environmental losses and measured mechanical work; boiling by itself does not determine an exact mechanical equivalent of heat. New to topics? Read the docs here!