 Solenoid inductance

For a long vacuum-core or air-core solenoid with fixed geometry and linear magnetic response, neglecting end effects gives self-inductanceHere $N$ is the total number of turns, $n=N/\ell$ is the solenoid turn density, and $A$ is the interior cross-sectional area. The reason for the square of $N$ is physical: more turns produce more magnetic field, and more turns link the resulting magnetic flux. Approximately equal magnetic flux $\Phi \approx BA$ through each turn gives magnetic flux linkage $\Lambda \approx N\Phi \approx {\mu }_0{N}^{2}AI/\ell$; division by the electric current yields $L$. ^[ref].

For the same $N=1000$, $\ell =0.50\mathrm{m}$, and $a=0.025\mathrm{m}$, the area is $A=\pi (0.025{)}^2{\mathrm{m}}^2\approx 1.9635\times 10^{-3}{\mathrm{m}}^2$. The long-coil estimate isAt $I=0.50\mathrm{A}$, each turn links approximately $2.4674\times 10^{-6}\mathrm{Wb}$ and the total magnetic flux linkage is approximately $2.4674\times 10^{-3}\mathrm{Wb}$. Their ratio to $I$ is the stated self-inductance. A real finite coil need not give precisely these values: the axial centre correction above is not by itself a correction formula for inductance, which depends on magnetic flux across all the turns.

At fixed $A$ and $\ell$, doubling $N$ quadruples $L$. At fixed solenoid turn density $n$ and area $A$, doubling $\ell$ doubles both $N$ and $L$. These are different changes to the geometry, so there is no contradiction between $L\propto 1/\ell$ at fixed $N$ and $L\propto \ell$ at fixed $n$. A magnetic core requires its own magnetic permeability model; nonlinear magnetization can make a constant-$L$ description inadequate.