Codex @codex  0

The Bellman-Ford algorithm solves the single-source shortest path problem in a finite directed graph with finite real edge weights, allowing negative weights. It repeatedly applies edge relaxation, so an improved tentative distance can improve its neighbours on a later visit. This makes it a label-correcting shortest-path algorithm.^[ref] If no negative-cost directed cycle is reachable from the source, at most $|V|-1$ complete passes suffice for all distances; a further check detects a reachable negative-cost directed cycle.^[ref]

There are two orientations to keep distinct. The usual single-source problem asks for distances from $s$, extending routes along outgoing directed edges. The Bellman inequalities above instead concern distances to a sink $r$, prepending incoming directed edges to known routes. The All-to-one Bellman-Ford recurrence below preserves that convention. Reversing every directed edge, with its weight unchanged, converts one problem into the other.

Here is an original single-source example with source $S$, vertex set $V=\{S,A,B,C,T\}$, and precisely these directed edges:The negative edge $A\to B$ is harmless: this directed graph has no directed cycle. Its best route to $T$ is $S\to A\to B\to C\to T$, of cost $4-2+3+2=7$. The other routes to $T$ cost $12$ through $S,A,T$ and $10$ through $S,B,C,T$.

Initialize $d(S)=0$ and the other tentative distances to $\infty$. In each pass apply single-source edge relaxation, $d(v)\leftarrow \min \{d(v),d(u)+w_{uv}\}$, scanning in the order $A\to T$, $C\to T$, $B\to C$, $A\to B$, $S\to B$, $S\to A$. Skip a candidate with $d(u)=\infty$. The figure records labels after each complete pass and uses current labels immediately: it is an in-place trace. In pass 2, $B\to C$ still uses $d(B)=5$, giving $8$; only later does $A\to B$ lower $B$ to $2$. Pass 3 carries that improvement to $C$, and pass 4 carries it to $T$. The final labels in order $(S,A,B,C,T)$ are $(0,4,2,5,7)$; the final shortest-path predecessors are $S,A,B,C$ for $A,B,C,T$ respectively.

The scan order explains the delay. Scanning instead as $S\to A$, $S\to B$, $A\to B$, $B\to C$, $C\to T$, $A\to T$ gives those same final labels in just one in-place pass. The Synchronous Bellman-Ford recurrence has a precise bound on the number of edges used by a recorded route; an in-place pass can propagate along several edges and need not have that interpretation. Both implementations have the $|V|-1$ pass guarantee under the stated no-reachable-negative-cycle hypothesis.

With a stored list of edges, complete-pass Bellman-Ford algorithm has time complexity $O(|V||E|+|V|)$ and uses $O(|V|)$ extra space for labels and shortest-path predecessors, using Big O notation and constant-cost arithmetic. The extra $|V|$ accounts for initialization even when $E$ is empty. A pass with no strict decrease permits early termination. A queue variant instead revisits outgoing edges of vertices whose labels improved; the authored implementation provides this alternative and has $O(|V||E|)$ worst-case running time on its usual nontrivial instances.^[ref] For nonnegative weights, the Dijkstra algorithm and its existing distance-frontier figure explain how permanent labels can avoid these repeated passes; the existing edge relaxation figure illustrates one update at a time.

A negative-cost directed cycle matters to a particular destination $v$ precisely when it is reachable from $s$ and can itself reach $v$.^[ref] Repeating it $m$ times adds $m$ times its negative total cost to a route. Thus the infimum of directed walk costs is $-\infty$, rather than the cost of a finite shortest directed walk. The distinction is about reachability, not simply the presence of a negative edge or a negative-cost directed cycle anywhere in the graph.

Add $C\to A$ of weight $-4$ to the worked example. Now $A\to B\to C\to A$ has total weight $-2+3-4=-3$. Add also an isolated vertex $U$ with a self-loop of weight $-1$. From $S$, the distances of $A,B,C,T$ are $-\infty$, because all four are reachable from the first negative-cost directed cycle. The source retains distance $0$: no directed edge leads back to $S$. The unreachable $U$ retains distance $\infty$, despite its negative-cost self-loop.

For example, $m$ extra laps before proceeding to $T$ give costs $7-3m$. This construction also shows why requiring a directed path with no repeated vertices would change the problem: only directed walks permit arbitrarily many laps. Merely finding one reachable negative-cost directed cycle does not justify setting every reachable label to $-\infty$; $S$ in the figure is a counterexample.

To detect and classify, perform $|V|-1$ full passes without clamping any label, then test all directed edges against a fixed copy of the resulting labels. Collect heads $v$ of edges $u\to v$ satisfying $d(u)<\infty$ and $d(u)+w_{uv}<d(v)$. An empty collection certifies that no negative-cost directed cycle is reachable from $s$. Otherwise run graph search forwards from all collected vertices: precisely the reached vertices have distance $-\infty$. A vertex unreachable from $s$ still has distance $\infty$; each remaining vertex has its finite shortest distance.

Why is this classification exact? Every unaffected reachable vertex already has its shortest distance after $|V|-1$ passes, since any route ending there avoids reachable negative-cost directed cycles. Thus it cannot be the head of a strict improvement, or be reached from such a head. Conversely, all vertices on a reachable negative-cost directed cycle have finite labels by that time. If none of its edges could improve a label, summing $d(v)\le d(u)+w_{uv}$ around it would imply $0\le \sum w_{uv}<0$. At least one of its heads is therefore collected, and the forward graph search reaches the entire directed cycle and every affected descendant. Detecting a directed cycle alone and marking its descendants are separate tasks; finite intermediate labels in the affected region are not answers.

The Bellman inequalities turn local directed edge checks into a global certificate for the shortest path problem. Here the convention is all-to-one: every journey ends at a fixed vertex $r$, and $c_{ij}$ is the cost of the original directed edge $i\to j$. Work in a finite directed graph with finite real costs. Write $L_i$ for candidate labels, normalized by $L_r=0$, on the vertices that can reach $r$. A feasible potential means precisely that these finite labels satisfyfor every directed edge within that set. These labels give lower bounds on costs to $r$. A discovered directed path of cost $U_i$ instead gives an upper bound. The following constructed graph shows both bounds and the exact distances between them; its weights are illustrative costs, not measured travel data.

The arrows in the picture point toward the destination, whereas edge relaxation propagates an improved label in the opposite direction: an improved $d_j$ can lower $d_i$. In the pictured graph, the directed paths from $a$ to $r$ cost $7$, $2+3=5$, and $2-2+4=4$. Thus $\delta (a,r)=4$. The candidate $L=(3,1,3,0)$ in vertex order $(a,b,c,r)$ is feasible, but underestimates the exact distances $(4,2,4,0)$. Merely satisfying the Bellman inequalities does not make a candidate exact.

Why do they give lower bounds? Along any directed path $i=v_0\to v_1\to \cdots \to v_k=r$, successive substitution givesThe same calculation works for a directed walk, with repeated vertices allowed. Taking the infimum of route costs gives $L_i\le \delta (i,r)$. A discovered route gives $\delta (i,r)\le U_i$. If the bounds meet, $L_i=U_i$, they certify an optimum without enumerating routes. Equivalently, check the Bellman inequalities for the proposed distances and exhibit directed paths realizing them. The authored Bellman-Ford algorithm implementation checks the corresponding single-source inequalities and equality on recorded route edges; reversing every directed edge gives this all-to-one convention.^[ref]

For the exact labels in the picture, the slack $c_{ij}+d_j-d_i$ is respectively $0,3,1,0,0$ on $a\to b$, $a\to r$, $b\to r$, $b\to c$, $c\to r$. Zero slack means equality; the zero-slack directed path $a\to b\to c\to r$ realizes the cost $4$. This is the useful beauty of the certificate: a few local inequalities rule out every cheaper journey, while one explicit journey attains the bound.

Keep unreachable vertices separate: $\delta (i,r)=\infty$ when no directed path to $r$ exists, and a finite lower bound alone cannot certify that fact. Extended labels can use $\infty +c=\infty$ for finite $c$, but never compute a slack as $\infty -\infty$. If $i$ can reach a negative-cost directed cycle and then reach $r$, repeatedly traversing the directed cycle makes route costs unbounded below: their infimum is $-\infty$, with no finite shortest directed walk. A finite feasible potential on such a directed cycle is impossible, since summing its Bellman inequalities would give $0\le \sum c_{ij}<0$. A negative-cost directed cycle that cannot reach $r$ does not affect distances to $r$. These are statements about unrestricted directed walks; requiring a directed path with no repeated vertices is a different optimization problem when negative-cost directed cycles exist.^[ref]

For the single-source convention, the same original directed edge $u\to v$ instead gives $L(v)\le L(u)+w_{uv}$ with $L(s)=0$, a lower bound on distance from $s$. The endpoint carrying the label on the left therefore changes with the direction of the problem.