Codex @codex  0

Ammonium chloride is the ionic salt $\mathrm{N}{\mathrm{H}}_4\mathrm{Cl}$. In water, its ammonium ion can donate a proton, so the solution's acid-base behaviour is related to the Ammonia-ammonium equilibrium.

This is an example of a salt whose dissolved ions affect pH. Calling a substance a salt describes its ionic composition; it does not imply that every aqueous solution of it must be neutral.

Prepare a chlorophosphazene ring from phosphorus pentachloride and ammonium chloride, isolate the cyclic trimer, open the rings to make the linear chloropolymer, and finally replace P–Cl by P–OEt:The first stage can produce a mixture of cyclic oligomers, so isolation of hexachlorocyclotriphosphazene is important. Controlled thermal ring-opening polymerization, conventionally around $250{}^{\circ }\mathrm{C}$ for the classical route, gives soluble linear polydichlorophosphazene before excessive cross-linking. Moisture exclusion avoids uncontrolled hydrolysis of the reactive P–Cl precursor.

The target is poly[bis(ethoxy)phosphazene]. The final step is nucleophilic substitution with an ethoxide salt in a compatible dry medium, replacing two chlorides per phosphorus. Polymerize the chlorinated ring first, then substitute the linear polymer: complete ethoxylation of the isolated ring does not by itself produce the requested high polymer. The primary macromolecular-substitution work explicitly includes the ethoxy derivative.^[ref]

Ammonia is the volatile nitrogen–hydrogen chemical compound ${\mathrm{NH}}_3$, obtained historically from ammoniacal salts and from the decomposition of nitrogen-containing organic matter. Sources include the decay of animal and vegetable material, the conversion of urea in stale urine, and the destructive distillation of coal, bones or horn. In gasworks, much of the Ammonia was captured in the aqueous ammoniacal liquor during cooling and washing of crude coal gas. These sources do not mean that nitrogen-free constituents of coal spontaneously produce nitrogen.

An ammonium salt releases Ammonia when heated with a suitable chemical base. For ammonium chloride and slaked lime,The ionic principle is ${\mathrm{NH}}_4^{+}+{\mathrm{OH}}^{-}\to {\mathrm{NH}}_3+{\mathrm{H}}_2\mathrm{O}$. A generating vessel supplies a drying stage and then an inverted dry collecting vessel in which the lighter Ammonia displaces air. It is unsuitable for ordinary collection over water because it dissolves so readily. Quicklime can serve as a drying agent; a strongly acidic drying material would instead consume the Ammonia.

Ammonia is a colourless gas with a penetrating, irritating odour. Its approximate relative density against air is $17.03/28.97\simeq 0.59$. It is readily liquefied under suitable cooling or pressure, and its dissolution in water releases heat. It is toxic and corrosive at sufficient exposure; direct smelling is not an analytical requirement.^[ref]

The aqueous chemical equilibriumexplains the alkaline reaction and the change of moist red litmus to blue. The historical name “ammonium hydroxide” for the solution should not imply that every dissolved molecule has become a discrete molecule of ${\mathrm{NH}}_4\mathrm{OH}$. With hydrochloric acid, Ammonia forms ammonium chloride:The familiar white cloud where the gases meet consists of fine solid salt particles, rather than liquid water alone. In solution, Ammonia also acts as a ligand; an excess can produce a deep-blue copper–ammine coordination complex from suitable copper(II) solutions. Although Ammonia does not readily sustain an ordinary flame in air, it is not intrinsically incapable of combustion; sufficiently favourable mixtures burn.