Antenna beam pattern Created 2026-10-18 Updated 2026-11-05
An antenna beam pattern gives an antenna's directional response as a function of observation angle. A normalized power pattern divides radiation intensity by its peak; a field-amplitude pattern is its square root under a consistent impedance convention. The beam solid angle integrates the normalized power pattern over direction, so ideal directivity is . A short dipole antenna has a power pattern proportional to , zero along its axis and maximum broadside. A narrow main lobe can coexist with sidelobes, so beamwidth alone does not specify the complete response.
Beam solid angle 2026-11-05
The beam solid angle of an antenna is the integral of its normalized radiated-power pattern over the complete sphere. If is radiated power per unit solid angle and is its maximum, then
It is measured in steradians and includes sidelobes and backlobes, not just a chosen main-beam boundary. Since total radiated power is , peak antenna directivity satisfies
The definition relates concentration of radiation to the entire pattern, rather than to a single width measurement.[ref]
For a narrow, axisymmetric Gaussian power pattern , replace by near the axis and extend the negligible tail to infinity. The resulting Gaussian beam solid angle is . Its full half-power width is , so . These approximations require a narrow beam with no significant additional lobes; a broad pattern or strong sidelobes requires the full integral.
Gaussian beam solid angle 2026-11-05
For a narrow axisymmetric Gaussian power pattern , the beam solid angle is approximately
The approximation replaces by and extends a negligible angular tail. If is the full half-power beamwidth, then and , with angles in radians. This is a power-pattern convention; a Gaussian field-amplitude width uses a different factor.
For radians the solid angle is approximately steradians, giving peak antenna directivity . Rotating a calibrated source or receiver and measuring the whole angular pattern tests the approximation: significant sidelobes contribute extra solid angle that a main-beam width cannot detect.[ref]