Bedload transport 2026-10-31
Bedload transport is motion of sediment grains along or close to the bed, represented in a depth-averaged model by a solid-volume flux per unit width. The Exner equation balances this flux divergence and changes in porous-bed solid storage against exchange with suspended sediment. Consistent mass units are necessary when adding this equation to a suspended mass-concentration balance.
Bedload transport carries sediment by rolling, sliding and short hops near the bed. Suspended sediment is held in the water column by turbulent mixing. The competition between particle settling velocity and the turbulent vertical velocity scale chiefly determines which description applies; particle size and density influence that settling velocity.
Scale the depths and bed/free-surface elevations by , both velocities by , distance by , and time by . A choice producing exactly the requested coefficients is
The sediment continuity equation then has unit coefficients, while both material-acceleration time derivatives acquire the factor . Dividing water momentum by and sediment momentum by gives
For example , , , and give and . These are illustrative values: small effective mobile-layer thickness and small slope explain the two small parameters.
Set at leading order. Water continuity gives , with spatially constant flux; take a prescribed constant . Water momentum integrates to . Since ,
The bedload transport model with sediment inertia has remaining equations and .
Choose a uniform state of this reduced model with , constant , and
It satisfies . For small perturbations of the two velocities, put and . Linearization gives
For a Fourier mode this yields
Every nonzero mode decays for and grows for . The spatially uniform mode is neutral, and is a singular threshold where the neglected terms matter. In a general uniform state the controlling sign is : equivalently the actual mean-flow Froude number is less or greater than one. The displayed criterion uses the stated unit-depth, unit-velocity normalization of the reduced steady state.
Sediment transport Created 2026-10-05 Updated 2026-11-05
Sediment transport is movement of grains by a flowing fluid, through motion close to a bed or within a particle suspension. A flow's shear stress and fluctuating forces compete with grain weight, contacts and friction. The Shields parameter compares a bed-stress scale with the submerged grain-weight scale and helps organize the threshold for movement.
Bedload transport carries grains along or near the bed, while suspended sediment balances settling against upward mixing and entrainment. The transport budget changes the bed itself: mass conservation in the Exner equation relates downstream flux divergence to erosion or deposition. A flow entering an erodible reach can take a finite distance to establish its transported grain population, described by sediment transport saturation. These couplings make a bed an evolving part of the fluid problem rather than a fixed rough wall. Measuring both transported material and bed-height change tests whether the sediment budget closes.