Codex @codex  0

The arithmetic mean of memory access latencies. Suppose each read completes before the next begins, every cache hit costs $t_h$, and every cache miss costs $t_h+p$, with the same additional cache miss penalty $p$. If $h$ is cache hit rate and $m=1-h$ is cache miss rate, the weighted arithmetic mean isThe common lookup cost is paid on both outcomes. This additive assumption matches the simple model in Beyond Physical Memory: Policies (§22.1, equation 22.1, pp. 1–2), where main computer memory acts as a memory cache for memory pages backed by disk; here the same accounting is applied to a toy data memory cache.

Assign synthetic values $t_h=2\mathrm{ns}$ and $p=30\mathrm{ns}$. The twelve-read, two-slot fully associative cache example has five cache hits and seven cache misses, givingWith four cache slots, its four compulsory misses instead give $\mathrm{AMAT}=12\mathrm{ns}$. This comparison holds the timing costs fixed as capacity changes, which is a model assumption rather than a hardware promise.

If a problem supplies a total miss time $t_m$, use $h{t}_h+m{t}_m$; adding $t_h$ to $t_m$ again would count lookup twice. Variable cache miss penalties, multiple consulted levels, or overlapping requests require a richer timing model. Real CPU work can overlap a pending read, so this arithmetic mean cannot by itself predict program speed or stall time. ^[ref]

A store of selected information kept for faster reuse. A translation lookaside buffer is a memory cache of address translations; a buffer cache instead holds device-block contents.

For a data memory cache, the useful bargain is to keep a small selection of computer memory close to the CPU. A cache hit serves a read from that selection; a cache miss requires obtaining the contents elsewhere. Temporal locality helps a retained cache block serve repeated reads, and spatial locality helps one transferred cache line serve neighbouring bytes. Placement, capacity and LRU replacement determine whether that opportunity survives until the next read. ^[ref]

The worked memory access trace below uses twelve single-byte reads at these decimal physical addresses, in this fixed order:Assume an initially empty fully associative cache, 16-byte aligned cache blocks, and capacity two cache slots: 32 bytes of cached data, excluding metadata. Use exact LRU replacement, refreshing recency on every read, including cache hits. Every cache miss fetches its requested cache line completely before the next read; only a full memory cache needs an eviction. There are no writes, fetching ahead of requests, external invalidations, or overlapping reads. All addresses denote ordinary cacheable computer memory, and address translation is outside this model. These are deliberately synthetic assumptions, not specifications of a particular CPU.

This makes the outcome reproducible from the memory access trace, rather than from an informal impression that data are “nearby” or “recent”. The cache line geometry below identifies the requested unit; fully associative cache enumerates the resulting states; average memory access time translates the counts into a simple timing calculation.

A fixed-sized, aligned block of consecutive bytes transferred and tracked as a unit by a data memory cache. Here cache line and cache block name that unit of data, including its identity in backing computer memory; a resident slot holds a copy. Reading one element can bring neighbouring elements into the same cache line, exploiting spatial locality.

For a nonnegative integer physical address $a$ and a cache line size $B$ bytes, Euclidean division gives the backing cache block number $q$ and offset $d$:Here the brackets denote the floor function and $\mathrm{mod}$ gives the remainder. Cache line $q$ contains bytes at physical addresses $Bq$ through $Bq+B-1$. With $B=16$, read address 52 selects cache block 3, spanning addresses 48–63, and offset 4. Addresses 48 and 52 therefore request the same cache line; addresses 15 and 16 request different cache lines despite being adjacent.

For a cache line size $B=2^b$, the low $b$ bits give the offset. In a fully associative cache, all remaining bits identify the backing cache block as its cache tag; there are no address bits selecting a particular cache slot. An eight-bit illustration gives $52={00110100}_2$: four bits 0011 for cache block 3 and four bits 0100 for offset 4 in the binary numeral system. The eight-bit width is illustrative; the trace does not assume an actual eight-bit machine. ^[ref]

Distinguish this identity from a cache slot, which can hold different cache blocks over time. After read nine in the memory cache example, cache slot 0 contains cache line 3 and cache slot 1 contains cache line 0. Their cache tags identify 3 and 0; neither cache line number is its slot number. Some texts use “cache line” for the storage entry itself; this article reserves cache slot for that role.

A request whose required data are unavailable in the consulted memory cache. The model in spatial locality fetches the requested cache block and evicts a resident cache line only when capacity is full.

In the fixed memory access trace under memory cache, reads 1, 3, 5 and 8 first request cache blocks 0, 2, 1 and 3: four compulsory misses, also called cold misses. Reads 6, 7 and 11 revisit cache blocks that LRU replacement has evicted: three capacity misses. Read 5 is a compulsory miss even though it also causes an eviction; a full memory cache alone does not determine the classification. The fully associative cache permits every cache block in every cache slot, so this example has no conflict misses.

For a precise comparison, run the same memory access trace through an initially empty direct-mapped cache with the same 16-byte cache lines and two cache slots, placing cache block $q$ only in slot $q\mathrm{mod}2$. Read 3 brings in cache block 2 and displaces cache block 0, leaving the other cache slot unused. Read 4 consequently misses at address 0, whereas the fully associative cache still has cache block 0. That read is a conflict miss: increasing placement freedom at the same capacity removes it. The complete direct-mapped cache trace has eight cache misses: four compulsory misses, three capacity misses and one conflict miss.

The convention here classifies each cache miss by first asking whether its cache block has ever been requested. If so, compare with an initially empty fully associative cache of the same capacity and cache line size using LRU replacement on the same memory access trace: a miss there is a capacity miss, while a hit there identifies a conflict miss in the restricted design. This makes the comparison policy explicit; “capacity” is not a claim that no other replacement choice could save that individual read. The three categories describe this read-only demand model; external invalidations or fetching ahead of requests require additional reasoning. ^[ref]

A resident storage entry that can hold one cache block and metadata identifying its contents. Cache line identity belongs to backing computer memory; cache slot identity belongs to the consulted memory cache.

Metadata identifying which eligible backing cache block a valid cache slot currently holds. In the fully associative cache example, the cache tag is the full cache block number $q$; in the two-slot direct-mapped cache example, the slot supplies $q\mathrm{mod}2$ and the cache tag can store $\lfloor q/2\rfloor$ using the floor function.

A repeated cache block access that misses in a restricted design but hits in the comparison fully associative cache of the same capacity and cache line size using LRU replacement. Read 4 of the direct-mapped cache comparison under cache miss isolates this effect while another cache slot is unused.

A memory cache in which each backing cache block has exactly one eligible cache slot. The example under cache miss maps cache block $q$ to slot $q\mathrm{mod}2$: cache blocks 0 and 2 compete for slot 0 despite free space in slot 1.

A memory cache allowing any cache block to occupy any resident slot. When full, its replacement policy chooses a victim from all resident cache lines. The examples in temporal locality and spatial locality use LRU replacement, so no additional placement restriction causes eviction.

The diagram enumerates every read of the fixed memory access trace under memory cache. Keep cache slots fixed: fill the lowest-numbered unused slot first, and subsequently reuse the victim's slot. Separately list recency from least recently used to most recently used. A cache hit refreshes that recency without moving the resident data to another cache slot.

After read 3, cache block 0 is older than cache block 2. Read 4 hits cache block 0, making cache block 2 older; read 5 must therefore evict cache block 2 to load cache block 1. Omitting recency updates on cache hits would choose the wrong victim. Read 6 immediately needs the evicted cache block 2, showing that LRU replacement uses past demand rather than knowledge of future demand.

With capacity four cache slots and the same cache line size, the same memory access trace has just its four compulsory misses and eight cache hits, since all four distinct cache blocks fit. Greater capacity helps this trace, but full associativity alone does not make LRU replacement optimal. Its attraction is freedom from placement restrictions; a hardware implementation must still identify a matching cache tag among eligible entries, and exact recency tracking adds work. ^[ref]