Controller (control theory)

A controller is the rule or mechanism that chooses a control signal. An open-loop control can depend on a precomputed schedule; a feedback control also uses a measured output and can have its own memory, as in integral action.

A feedback gain sets the strength of a controller's response to its observations. For proportional control, $u=ke$ means that a tracking error $e=0.1$ produces a control input $u=0.2$ when $k=2$.

Actuator saturation means the applied control input reaches a device limit even if the controller requests a larger or smaller command. In the heater interpretation, the applied command is bounded between $0$ and $100\%$. If integral action continues accumulating a persistent tracking error beyond that limit, its stored integral can grow without producing the requested physical correction, delaying recovery when the goal changes. The unconstrained steady-state tracking error formulas require that the necessary command can actually be applied. ^[ref]

An ideal PID controller combines proportional control, integral action, and a term proportional to the derivative of the tracking error. With $k_d=0$, it gives proportional-integral control. The integral stores past error, while the derivative responds to its current rate of change. Practical implementations must account for measurement noise, which an ideal differentiator can amplify. ^[ref].