Etalon delay inferred from free spectral range (${\tau }_{\mathrm{rt}}\simeq 1/\Delta {\nu }_{\mathrm{FSR}}$)

An etalon delay inferred from free spectral range estimates an etalon round-trip delay from the frequency spacing of adjacent transmission resonances. When round-trip group delay varies little across that spacing,The measured quantity is resonance spacing, not the width of one resonance. The manufacturer tutorial explicitly distinguishes free spectral range from optical finesse, which compares that spacing with an individual peak's width.^[ref]

The relation follows from wave phase. Let $\varphi (\nu )$ be the total etalon round-trip phase, including relevant reflection phases. Adjacent resonances satisfy $\varphi ({\nu }_{m+1})-\varphi ({\nu }_m)=2\pi$. Defining ${\tau }_{\mathrm{rt}}(\nu )=(2\pi {)}^{-1}d\varphi /d\nu$ gives the exact interval relationThus the reciprocal spacing is the delay averaged over that frequency interval. Interpreting it as a local pulse-envelope delay requires sufficiently weak variation across the interval and relevant pulse spectrum.

For a uniform plate at normal incidence with negligible frequency-dependent reflection phase, $\varphi =4\pi \nu n(\nu )L/c$. Differentiation gives ${\tau }_{\mathrm{rt}}=2n_{g}L/c$, where $n_g=n+\nu dn/d\nu$ is the group refractive index. Treating $n$ as frequency independent recovers the manufacturer tutorial's elementary plate formula; using a phase index in a strongly dispersive material can instead give the wrong delay.

An original measured-spacing example takes $\Delta {\nu }_{\mathrm{FSR}}=25.0\mathrm{GHz}$. The inferred delay is $40.0\mathrm{ps}$. A spacing standard uncertainty of $0.2\mathrm{GHz}$ contributes approximately $0.32\mathrm{ps}$ to the delay uncertainty through $u(\tau )=u(\Delta \nu )/(\Delta \nu {)}^2$. With stipulated $n_g=1.50$ and negligible coating delay, the corresponding plate thickness is about $4.00\mathrm{mm}$.

In a spectral experiment, identify adjacent peaks of the same resonance family and calibrate the frequency coordinate. If the coordinate is wavelength, use $\Delta \nu =c|1/{\lambda }_1-1/{\lambda }_2|$ rather than treating a wavelength interval as a frequency interval. Beam angle, dispersion and reflection phase belong in the propagation model.

A time-domain check looks for replicas separated by the predicted extra round trip. The historical single-shot correlator experiment inserted a known-thickness BK7 etalon to calibrate delay and separately placed an uncoated etalon in the input to create a double-reflection postpulse.^[ref] The single-pass delay caused by inserting glass into an arm is distinct from the additional round-trip separation of successive transmitted replicas.