Best glide speed 2026-11-05
The best glide speed is the airspeed giving the greatest horizontal distance per unit height lost in a specified steady glide condition. In still air this is the speed for maximum lift-to-drag ratio. It differs from the minimum sink speed, whose objective is longest time aloft for a given height loss.[ref]
Write a glider sink polar as downward rate . The horizontal air-relative speed is , so the exact still-air range per unit height is . For a shallow glide angle, and maximizing range is approximately minimizing . At an interior optimum,
Geometrically, a line from the origin is tangent to the positive-downward-rate polar. This is not the horizontal tangent defining minimum sink speed.
For an original calculation, take a parabolic drag polar and approximate . At fixed air mass density , wing area and gravitational weight ,
Minimizing gives
Stipulate , , , and . Then , in the corresponding SI units, , and the model gives . Its shallow-glide range ratio is . These parameters are invented; an attainable lift coefficient and a valid drag polar are prerequisites, not consequences of the optimization.
Figure 1.
Minimum sink and best glide are different optima of an original shallow-glide polar. Positive vertical values denote downward speed; the curve is an invented model, not measured aircraft performance.
Details.
Wind changes the ground-range objective to for an along-track wind component and no vertical air motion. Therefore the still-air optimum need not maximize ground distance. The FAA constructs the corresponding shifted tangents on its performance polars.[ref] A controlled performance measurement records steady airspeed and height loss at several speeds; wind, vertical air motion and changes of loading must be distinguished from the polar itself.
Minimum sink speed 2026-11-05
The minimum sink speed is the airspeed at which a glider has its smallest steady downward speed relative to the air, for a specified configuration, loading and flight condition. It maximizes time aloft from a given height in still air. It does not generally maximize horizontal range, which defines best glide speed.[ref]
For a differentiable glider sink polar , an interior minimum satisfies , with a positive second derivative sufficient for a strict local minimum. For the original shallow-glide model developed in best glide speed,
With , this gives
Indeed for . The speed ratio is about , within this stipulated parabolic drag polar approximation. A real polar need not follow that numerical ratio, especially near aerodynamic stall.
Using the same original , and gives and . From a stipulated height, the model's times are about at minimum sink and at best glide. Yet the approximate range ratios are and , respectively. The slower optimum buys time rather than maximum distance.
A horizontal wind changes range without changing air-relative sink at a fixed condition. Vertical air motion changes ground-relative height loss as well: descending at through air rising at gives ground-relative descent . Observing constant height therefore does not establish zero air-relative sink. A bank angle also changes the required lift and hence the appropriate polar; the straight-glide optimum cannot simply be reused for a tight turn.