Indicated airspeed ($V_{\mathrm{IAS}}$)

Indicated airspeed is the airspeed read directly from an indicator before correcting its instrument and installation errors. It is a displayed measurement, not automatically the aircraft's true airspeed or groundspeed. A conventional Pitot-static tube supplies total and static pressure through separate connections; the indicator converts their difference into a speed reading.^[ref]

A simple low-Mach number instrument model uses a standard reference mass density ${\rho }_0$ and the sensed difference $q_I$:This formula describes the stipulated ideal scale; real instrument errors need separate characterization. In particular, using ${\rho }_0$ does not assert that local air has that mass density.

For an original error example, let the actual total-minus-static difference be $245\mathrm{Pa}$, but suppose the static connection reads $12\mathrm{Pa}$ too high while the total-pressure connection is correct. Then $q_I=233\mathrm{Pa}$. With ${\rho }_0=1.225kg/{\mathrm{m}}^3$, the model shows $19.50m/s$ instead of $20.00m/s$. A positive error in one input has become a negative error in the difference. At lower pressure differences, the same offset has a larger fractional effect on the indicated speed.

A pressure-bench check can apply known differences to the instrument and test its zero and scale. It cannot alone characterize static-pressure position error caused by the ports' location on the flying aircraft. Calibrated airspeed accounts for the established instrument and installation corrections. A blocked port is another failure mode: treating every discrepancy as a correctable constant offset would conceal a changing or trapped pressure signal. The FAA specifically identifies obstruction and instrument deterioration as causes of incorrect indications.^[ref]