Arno de Klerk 2026-11-05
Arno de Klerk researches chemical conversion processes, including catalysis and hydrocarbon oxidation. His University of Alberta profile records qualifications in chemical engineering and analytical chemistry and describes work connecting conversion chemistry with reactor behavior.[ref]
Arno de Klerk at the University of Alberta. Official profile, About and Research
Measuring what reactants actually reach a liquid-phase reaction is one link between those subjects.Arno de Klerk, portrait identified by the University of Alberta directory
. Source. With Muhammad N. Siddiquee, de Klerk coauthored a 2016 study of in situ liquid-phase oxygen measurement during oxidation. The primary abstract explains why oxygen availability affects reaction rate and product selectivity.[ref]
In Situ Measurement of Liquid Phase Oxygen during Oxidation by Muhammad N. Siddiquee and Arno de Klerk. Industrial & Engineering Chemistry Research 55, pp. 6607–6618, byline and Abstract
The contribution concerns quantifying the reaction environment rather than equating gas supplied to a vessel with dissolved reactant available everywhere inside it.An original well-mixed balance illustrates the issue. Let liquid oxygen concentration be , its equilibrium value at the gas boundary be , the volumetric transfer coefficient be , and a stipulated first-order consumption coefficient be . ThenFor and , the steady dissolved concentration is only . Doubling the transfer coefficient gives even though the intrinsic consumption coefficient is unchanged. A changed measured oxidation rate need not imply changed intrinsic chemical kinetics.
This is a deliberately simplified interphase mass transfer model, not reconstructed experimental data. Spatial gradients, changing products and chain reactions can require a richer description. Direct measurements of liquid composition make it possible to test which interpretation of a reactor's behavior is consistent with the observations.
Oxygen-limited autoxidation 2026-11-05
Oxygen-limited autoxidation occurs when the availability of molecular oxygen restricts the observed reaction rate. Oxygen can be consumed faster than it is replenished through interphase mass transfer, even when the gas above a liquid contains plenty of oxygen. A slow oxidation trace therefore does not by itself establish efficient radical-trapping antioxidant action.
A primary study measured dissolved oxygen availability during liquid-phase hydrocarbon autoxidation, rather than relying only on transport predictions. Its reported oxygen-transfer coefficients differed between benzene and indan under the stated conditions, illustrating why a gas atmosphere alone does not specify the liquid's oxygen supply.[ref]
In Situ Measurement of Liquid Phase Oxygen during Oxidation by Muhammad N. Siddiquee and Arno de Klerk. Publisher abstract, in situ oxygen availability and solvent-specific mass-transfer coefficients
An original well-mixed mass balance separates transfer from consumption. Let be dissolved oxygen concentration, its equilibrium value at the imposed gas composition, and the volumetric transfer coefficient. If a simplified local rate law consumes oxygen at , thenWith constant coefficients, the steady state isFor , the liquid stays near and the rate responds strongly to chemical kinetics. For , the rate approaches the transfer ceiling . This first-order consumption model illustrates the transport mechanism; it is not a universal elementary rate law for radical-chain oxidation.
For and , and . Doubling only raises the rate to about , a increase. A nearly flat response to a chemical perturbation can thus be a delivery limitation.
A discriminating experiment changes stirring or gas-liquid contact while matching temperature, substrate, initiator and optical settings, and records dissolved oxygen as well as the oxidation signal. Dependence on transfer conditions reveals a limitation that an optical trace alone can hide. In a closed vessel, finite total oxygen adds another constraint: the gas reservoir itself can become depleted, so cannot then be treated as constant.
Past exam of the topics in fluid mechanics course of the University of Oxford 2008 3 a Solution 2026-10-31
Define to be one in phase 1 and zero in phase 2, including its dependence on both transverse coordinates even though the averaged fields depend only on . With no interphase mass transfer, its distributional phase-mass equation is . At a pipe cross section of area , setThus is an intrinsic phase density and is the density-weighted mean axial velocity. This weighting is necessary when density varies within the phase; it becomes the ordinary intrinsic mean for an incompressible phase of constant density.
Integrate over the cross section. The transverse divergence contributes no boundary mass flux at the impermeable pipe wall, and the material interface has no mass leakage. The section area is constant, soFor phase 2 use and fraction , with the analogous intrinsic density and density-weighted velocity:The intrinsic quantities are defined where their phase fraction is nonzero. These are the intrinsic phase averages in a two-fluid pipe model.