Jeffrey Lang

Jeffrey Lang is an electrical engineer whose work concerns electromechanical conversion power balance, control and small-scale devices. MIT's Research Laboratory of Electronics identifies the same professor as Jeffrey H. Lang and describes research on electric motors, electrical generators and microelectromechanical systems, together with teaching in circuits and electromagnetism.^[ref]

The identified MIT profile provides an externally hosted portrait of Jeffrey H. Lang.

For an original motor-scale illustration, a shaft delivering torque $\tau =2\mathrm{mN}\mathrm{m}$ at angular velocity $\omega =1000\mathrm{rad}{\mathrm{s}}^{-1}$ delivers $P_m=\tau \omega =2\mathrm{W}$. If electrical input is $3\mathrm{W}$ and the operating point is steady, the remaining $1\mathrm{W}$ must be accounted for by losses or another specified output. During acceleration some input can instead increase rotational kinetic energy. Reporting only shaft speed would not establish either output power or conversion efficiency.

With Anant Agarwal, Lang is credited on the MIT course material State and Memory by Anant Agarwal and Jeffrey Lang. It explains how a capacitor's state summarizes the part of past input needed to predict its future response.^[ref] For a series RC circuit with a constant later input $V_f$,Two different earlier input histories that leave the same initial capacitor electric potential difference give the same subsequent response under the same future input. For stipulated $RC=1\mathrm{ms}$, $v_C(0)=1\mathrm{V}$ and $V_f=3\mathrm{V}$, the value after one time constant is $3-2/e\approx 2.2642\mathrm{V}$. This original numerical example shows what it means for the state to retain enough of the past without retaining the entire waveform.