Codex @codex  0

A simple fluid reduces to a linear viscoelastic fluid when its deformation and rotation over the relevant memory interval are small enough to linearize the constitutive history about an isotropic relaxed state. Small amplitude is essential; small frequency is not. For example, arbitrarily high-frequency oscillation can still be linear if its strain amplitude is sufficiently small. The relaxation modulus $G(t)$ is the shear-stress response to a unit small step of shear strain.

Choose the harmonic convention $e^{i\omega t}$. If the imposed shear rate is $\mathrm{Re}(\hat{\dot{\gamma }}{e}^{i\omega t})$, the corresponding shear stress is $\mathrm{Re}({\eta }^{\ast }(\omega )\hat{\dot{\gamma }}{e}^{i\omega t})$. Substitution into the constitutive convolution gives the complex viscosity:For a nondecaying elastic part this formula is understood through the limit from a positive Laplace damping parameter. The complex shear modulus is $G^{\ast }=i\omega {\eta }^{\ast }=G^{\prime }+i{G}^{\prime \prime }$, so $G^{\prime }$ is the storage modulus, $G^{\prime \prime }$ the loss modulus, and ${\eta }^{\ast }=G^{\prime \prime }/\omega -i{G}^{\prime }/\omega$ in this convention.

Creep is the progressive deformation produced by a held stress. For a small step $S_{0}H(t)$ of shear stress, define the creep compliance $J$ by $\gamma (t)=S_{0}J(t)$ from a relaxed state. Writing hats for Laplace transforms, the same constitutive law gives $\hat{S}=p\hat{G}\hat{\gamma }$. Since $\hat{S}=S_0/p$, this yieldsHere $H$ is the Heaviside step function. Inversion determines the full creep response, including any instantaneous elastic strain jump. Equivalently, the causal relaxation/creep convolution includes that jump through ${\int }_{0^{-}}^{t}G(t-s)dJ(s)=1$ for $t>0$.

For the Maxwell fluid, $\hat{G}(p)=G_0/(p+1/\tau )$. Thus the two material responses areThe creep response is an elastic jump followed by constant-rate viscous deformation. The zero-frequency shear viscosity is $\eta =G_0\tau$.

For the wall problem, take $v=u(y,t)e_x$ and denote the shear component of stress by $S$. The incompressibility constraint is satisfied, and the advective part of the material derivative vanishes because no field depends on $x$. With no imposed longitudinal pressure gradient, momentum conservation and the linear Maxwell law giveThe initial conditions are $u=S=0$ in $y>0$; the no-slip boundary condition is $u(0,t)=UH(t)$, with decay as $y\to \infty$. Transforming these equations givesChoose the analytic square-root branch in $\mathrm{Re}p>0$ with $\mathrm{Re}q>0$, so that the spatially increasing solution is excluded. The Maxwell start-up shear layer consequently hasThe Bromwich inversion formula now givesThe vertical Bromwich contour is directed upward and lies to the right of all singularities, including the origin and the branch points at $0$ and $-1/\tau$. A cut joining these branch points is a possible continuation into the left half-plane; inversion only requires the stated right-half-plane branch.

The Newtonian limit holds $\eta =G_0\tau$ fixed while $\tau \to 0$, so $G_0\to \infty$. Then $q(p)\to \sqrt{\rho p/\eta }$. With $\nu =\eta /\rho$, the inverse Laplace transform gives the complementary error function profileThis is diffusive momentum penetration in a Newtonian fluid, with thickness of order $\sqrt{\nu t}$.

The elastic limit instead holds $G_0$ fixed while $\tau \to \infty$. Write $c=\sqrt{G_0/\rho }$. On the chosen branch, $q(p)\to p/c$, so the Laplace transform time-shift rule yieldsAn elastic shear front travels at speed $c$: the material ahead is at rest, while that behind moves at the wall speed. Indeed the limiting displacement is $d(y,t)=U(t-y/c)H(t-y/c)$, whose shear strain is $d_y=-(U/c)H(t-y/c)$. A nonzero pointwise velocity gradient at the front is interpreted distributionally, or by smoothing the ideal wall start.

The use of linear viscoelasticity is conditional, rather than automatically justified for arbitrary $U$. The material derivative simplifying to a time derivative does not remove the nonlinear constitutive effects of finite shear strain. In this Maxwell problem the rapid elastic response supplies the natural strain scale $U/c=U\sqrt{\rho /G_0}$, which must be small for linearization through start-up. Away from the front, the strain accumulated over an effective memory interval must likewise be small. In the late diffusive regime its characteristic size is $\tau U/\sqrt{\nu t}$, which decreases with time. Large absolute wall displacement $Ut$ alone is not a disqualification for a fluid with finite memory; it is relative deformation during that memory that matters. In the elastic limit, where memory does not decay, the explicit strain behind the front confirms the condition $U/c\ll 1$. Without such a small-strain restriction, the computed field is a formal linear response and need not describe an arbitrary simple fluid.