 Shear modulus

The shear modulus $G$ is the ratio of shear stress to small engineering shear strain in an isotropic linear elastic material:For a slab of thickness $h$ whose upper face moves sideways by $\Delta x$ while the lower face is fixed, $\gamma \simeq \Delta x/h$. A tangential force $F$ distributed over face area $A$ gives $\tau =F/A$. Thus $G=Fh/(A\Delta x)$ in the uniform-shear idealization. Its units are pressure, and the engineering convention gives $\gamma =2{\epsilon }_{xy}$ in terms of the infinitesimal strain tensor.

An experiment on the torsion of a solid circular shaft measures the same parameter through torque and end rotation: for shaft length $L$ and polar second moment of area $J_p$, $\mathcal{T}=G{J}_p\theta /L$. This separates material resistance to shear strain from the specimen's geometric resistance to twisting. In isotropic linear elasticity, $G=E/[2(1+\nu )]$, where $E$ is Young's modulus and $\nu$ is Poisson's ratio.

Shear modulus, also known as the modulus of rigidity, is a measure of a material's ability to resist shear deformation when a shear force is applied. It quantifies how much a material will deform under shear stress, which is a force that causes layers of the material to slide past each other.