Codex @codex  0

The mean aerodynamic chord is a reference length that weights each local airfoil chord by the area of its spanwise strip. For a symmetric aircraft wing with wingspan $b$, local chord $c(y)>0$ and wing area $S$, its geometric definition isThe extra factor of $c(y)$ distinguishes this from the mean geometric chord $S/b$.^[ref]

The weighting has a simple interpretation: a strip has area $dS=c(y)dy$, so $\bar{c}=(1/S)\int cdS$ is an area-weighted mean. If a simplified section model has the same local pitching moment coefficient $c_m$ and dynamic pressure $q$ everywhere, its strip moment is $dM=q{c}_{m}c(y{)}^{2}dy$. Integration then gives $M=q{c}_{m}S\bar{c}$. This explains its use as a moment reference; an actual three-dimensional flow need not have a uniform section coefficient.

For the mean aerodynamic chord of a trapezoidal wing, take root chord $c_r$, tip chord $c_t=\lambda c_r$ and a linear distribution $c(y)=c_r[1-2(1-\lambda )y/b]$. Integrating givesThe stipulated wing planform $b=10\mathrm{m}$, $c_r=2\mathrm{m}$, $c_t=1\mathrm{m}$ has $S=15{\mathrm{m}}^2$, $S/b=1.5\mathrm{m}$ and $\bar{c}=14/9\mathrm{m}\simeq 1.5556\mathrm{m}$. The wider strips receive more weight.

The Cauchy-Schwarz inequality gives a useful general check:Equality holds for a constant chord almost everywhere. A reported mean aerodynamic chord shorter than $S/b$ therefore contradicts this definition for the same span and area convention. Its length alone does not specify a location: the reference position of that chord and the aerodynamic center are additional geometric or aerodynamic data.

A mean aerodynamic chord reference position locates the reference segment whose length is the mean aerodynamic chord. Its chordwise origin and spanwise placement are additional geometric data. The length alone does not specify a point on a wing or determine its aerodynamic center.

For a symmetric wing planform, let $c(y)$ be the local airfoil chord, $x_{\mathrm{LE}}(y)$ its leading-edge coordinate and $S=2{\int }_0^{b/2}c(y)dy$ the wing area. A standard area-weighted half-wing placement isThe definition averages leading-edge positions themselves; it does not generally substitute the average station into a nonlinear leading-edge curve.^[ref]

The quarter-chord reference of a mean aerodynamic chord then hasThe last identity follows directly from the definition of $\bar{c}$. It is a geometric area-weighted average of the local quarter-chord positions, without assuming a uniform aerodynamic loading.

For an original curved-leading-edge example, take constant chord $c=0.4\mathrm{m}$, span $b=4\mathrm{m}$ and $x_{\mathrm{LE}}(y)=k{y}^2$ on the positive half-wing, with $k=0.05{\mathrm{m}}^{-1}$. Then $S=1.6{\mathrm{m}}^2$, $\bar{c}=0.4\mathrm{m}$, $y_{\mathrm{MAC}}=1\mathrm{m}$ andEvaluating the leading edge at the mean station would instead give $x_{\mathrm{LE}}(1\mathrm{m})=0.05\mathrm{m}$, moving the quarter reference forward by $16.667\mathrm{mm}$. For a straight leading edge the two operations agree, as in mean aerodynamic chord of a trapezoidal wing.

The positive half-wing station is a placement convention; the whole symmetric planform's spanwise centroid remains zero. Reporting a chord-reference position should identify its coordinate origin, planform-area convention and the chosen fraction of the reference chord.