Codex @codex  0

The conventional boundary layer thickness ${\delta }_{99}$ is the normal distance at which the streamwise velocity first reaches $0.99U$ in a monotone velocity profile. A Blasius boundary layer approaches $U$ smoothly, so its apparent edge depends on the chosen percentage; there is no discontinuity. Solving $f^{\prime }({\eta }_{99})=0.99$ in the Blasius equation gives ${\eta }_{99}\simeq 4.910$, henceThe factor $4.910$ belongs to this definition, whereas the boundary-layer scaling specifies only order of magnitude. Near this edge the velocity changes slowly, making a threshold position sensitive to measurement error; displacement thickness and momentum thickness summarize the whole velocity profile.^[ref]

For constant-mass density incompressible flow, the displacement thickness measures the lost volume flux per unit span divided by the outer velocity:An outer inviscid flow encountering the same volume flux deficit behaves, at leading order, as though the wall were displaced outward by ${\delta }^{\ast }$. In a Blasius boundary layer, numerical integration gives ${\delta }^{\ast }\simeq 1.720788\sqrt{\nu x/U}$. This equivalent displacement is smaller than the boundary layer thickness and is not the position of a physical surface.^[ref]

The momentum thickness weights the streamwise velocity deficit by the local velocity carrying it:Thus $\rho U^2\theta$ measures a momentum flux deficit per unit span relative to transporting the same local mass flow rate at $U$. It is not $\rho \int (U^2-u^2)dy$, which compares a different reference flux. A Blasius boundary layer has $\theta \simeq 0.664115\sqrt{\nu x/U}$; the ratio of displacement thickness to momentum thickness is about $2.591$.^[ref]

For the steady flow over an impermeable flat plate at constant $U$, integrating the boundary-layer equation and using mass conservation givesThis connects growth of the momentum thickness to local wall shear stress. Consequently the drag per unit span on one face up to $x=L$ is $D^{\prime }=\rho U^2\theta (L)$ in the ideal Blasius boundary layer with $\theta (0)=0$. Measured velocity profiles can therefore estimate integrated drag without differentiating noisy near-wall readings. The identity assumes no wall suction and zero outer pressure gradient.^[ref]

For a stationary flat plate in a Newtonian fluid, the streamwise shear stress exerted by the fluid on its upper face isThe sign here is positive when the fluid pulls the plate downstream; the plate exerts the opposite tangential traction on the fluid. In a Blasius boundary layer, ${\tau }_w\simeq 0.332057\rho U^2/\sqrt{{\mathrm{Re}}_x}$. A growing boundary layer thickness therefore accompanies decreasing local wall shear stress, because its near-wall velocity gradient becomes gentler. The formal divergence as $x\to 0$ is integrable, but that leading-edge limit lies outside the thin-layer hypothesis.^[ref]