Codex @codex  0

Nuclear engineering designs and studies systems that use nuclear reactions or manage materials with radioactivity. Its subjects include nuclear reactors, radiation detection, radiation shielding, nuclear fuel, the behaviour of structural materials under irradiation, and radioactive waste management.

A nuclear power plant shows why several areas of engineering must work together. Nuclear fission releases energy; a coolant transports the resulting heat; a heat engine converts part of that heat to mechanical work; an electrical generator produces electrical energy. In a pressurized water reactor, a heat exchanger transfers heat from the pressurized reactor coolant to a separate circuit that produces steam. Thus neutron physics, heat transfer, fluid mechanics and materials science constrain the same design.^[ref]

A nuclear power plant converts energy from controlled nuclear fission into electrical energy. A nuclear reactor produces heat; a coolant carries it to the working cycle; a turbine drives an electrical generator. A pressurized water reactor transfers heat to a separate steam circuit, whereas a boiling water reactor generates steam in the reactor vessel.^[ref]

If thermal input is $P_{\mathrm{th}}$ and conversion efficiency is $\eta$, gross electrical output is approximately $\eta P_{\mathrm{th}}$; the remaining thermal power must be rejected. The plant also needs its own electrical supply, so gross output differs from net export. After the chain reaction stops, decay heat still requires removal.