Codex @codex  0

Bragg's law selects directions of constructive interference in coherent elastic scattering from equally spaced lattice planes:Here $d>0$ is the perpendicular interplanar spacing, $\lambda >0$ the incident wavelength, $n$ the positive integer diffraction order, and $\theta$ the Bragg angle, measured between the incoming beam and the lattice planes. The scattering deflection, between incoming and outgoing propagation directions, is $2\theta$. Thus a plotted detector angle $2\theta$ must be halved before insertion into Bragg's law. The $\theta$ in the parent elastic Bragg scattering condition denotes the full deflection; the present $\theta$ denotes half of it. ^[ref]

The lattice planes organize wave interference throughout a crystal structure; they are not literal metal mirrors or separate reflecting surfaces. The picture assumes elastic scattering, hence an unchanged wavelength, and sufficiently stable relative wave phases across the contributing lattice planes. X-ray wavelengths comparable with atomic interplanar spacings make these directions experimentally accessible. The sine cannot exceed one: an order exists geometrically only if $n\lambda /(2d)\le 1$. For $\lambda >2d$, even the first diffraction order is inaccessible. A geometrically possible direction need not have nonzero wave intensity; the crystal lattice structure factor and crystal basis structure factor also matter. ^[ref]

Consider a chosen primitive cubic lattice $a{\mathbb{Z}}^3$ with $a=0.400\mathrm{nm}$ and one identical point scatterer per primitive unit cell. Retain the incident wavelength $\lambda =0.154\mathrm{nm}$. This is an ideal point model. Its reciprocal lattice vectors are $q=(2\pi /a)(h,k,l)$ for integer triples other than $(0,0,0)$. Write $S=h^2+k^2+l^2$. The associated interplanar spacing and first-order Bragg angle satisfyThe reflection labels $(hkl)$ use the Miller index convention, keeping unreduced triples to encode diffraction order. With that convention, set $n=1$ in Bragg's law for each label. The $(200)$ reflection is equivalently the second diffraction order of $(100)$: $d_{200}=a/2$ does not imply extra scatterers halfway between the occupied $(100)$ planes. Counting both descriptions as distinct reflections would count the same direction twice.

For $(100)$, $(110)$, $(111)$ and $(200)$, respectively, $S=1,2,3,4$ and the calculated interplanar spacings are $0.400000$, $0.282843$, $0.230940$ and $0.200000\mathrm{nm}$. Their calculated deflections $2\theta$ are $22.197435^{\circ }$, $31.594744^{\circ }$, $38.952948^{\circ }$ and $45.287481^{\circ }$. Equal steps in $S$ give equal steps in ${\sin }^2\theta$, not equal steps in $2\theta$. This regularity makes an angular pattern a test of a proposed crystal structure.

A real crystal structure has a Bravais lattice together with an atomic basis of a crystal. The crystal lattice structure factor selects the periodic directions; the crystal basis structure factor combines the scattering amplitudes of atoms within a unit cell and can cancel a reflection. Consequently Bragg's law alone predicts neither allowed reflections nor their wave intensities. ^[ref] Systematic absences further restrict observed families; for example, face-centered cubic lattice centering permits only indices all even or all odd in conventional cubic indexing. The four strips above apply to the stated primitive cubic lattice, not to sodium chloride or a face-centered cubic lattice. ^[ref]