Superconductor coil experiment video by 
Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01
Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01TODO!!! Even this is hard to find! A clean and minimal one! Why! All we can find are shittly levitating YBCO samples in liquid nitrogen! Maybe because liquid helium is expensive?
First 10T Tape Coil by Mark Benz
. Source. Dr. Mark Benz describes the first commercially sold superconducting magnet made by him and colleagues in 1965. The 10 Tesla magnet was made at GE Schenectady and they sold magnets to research facilities world wide before the team formed Intermagnetics General. IGC and Carl Rosner went on to pioneer MRI technology.Online and free. Pay only for exams, i.e. exam as a service. Almost perfect according to Ciro Santilli's idea.
TODO is teaching material open or not?
Asked: twitter.com/cirosantilli/status/1687865554722562048
An ultra-low-cost college degree by Shai Reshef (2014)
Source. Most important superconductor material by Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01
Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01As of 2023 the most important ones economicaly were:The main application is Magnetic resonance imaging. Both of these are have to be Liquid helium, i.e. they are not "high-temperature superconductor" which is a pain. One big strength they have is that they are metallic, and therefore can made into wires, which is crucial to be able to make electromagnetic coils out of them.
- Nb-Ti: the most widely used one. Used e.g. to create the magnetic fields of the Large Hadron Collider Up to 15 T.
- Nb-Sn: more expensive than Nb-Ti, but can reach up to 30 T.
Universities are obsessed by their images by Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01
Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01The image of an university is basically their only real asset, which they extract money out of via undergraduate students in some countries like the USA, and by getting funding.
For this reason, universities will sacrifice basically any principle in order to give themselves a good image.
Although for profit companies also do this, it is simply on another level for universities.
TP Link Archer VR2800 router Virgin Media Hub 3.0 Wifi setup by Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01
Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01Put Hub 3.0 in modem mode on 192.168.0.1. Turn it off. You MUST TURN IT OFF NOW.
TP Link Archer VR2800 192.168.1.1 > "Operation mode" > "Wireless router mode" (was "DSL Modem/Router mode" by default).
Custom configs we had, not sure if mandatory:
- Dynamic DHPC mode
- Unicast DHCP
Wait for TP link to fully reboot.
Connect port 4 of tp link (marked WAN/LAn) to port 1 of VM Hub (unmarked, but it is magic, has to be port 1).
Finally, AFTER everything else is setup, turn on the Hub and wait for a few minutes. It ONY WORKS if you turn it on after everything is setup.
Outcome:
- hub light turns purple: www.reddit.com/r/VirginMedia/comments/c703t6/purple_light_on_the_box/
- Archer WAN light turns on white. Not red. Red means error
- you have Wifi. Notably, the 5G Wifi is way way faster and reaches the WAN limit of 256 Mbps.
- Ethernet does not work anymore on either Hub nor Archer, Wifi only. But it doesn't matter because the 5G Wifi already reaches the speed limit.
Bibliography:
- community.virginmedia.com/t5/Forum-Archive/Connecting-Tp-link-archer-vr2800-to-Hub-3/td-p/4765927 This was The thread, the only one that clearly explained the fundamental importance of turn on off ordering by "jbrennand".
- community.tp-link.com/en/home/forum/topic/269540
- community.tp-link.com/en/home/forum/topic/170344
- community.virginmedia.com/t5/Gaming-Support/Connecting-Archer-VR2800-to-Hub-4/td-p/5246513
High temperature superconductor superconducting magnet by Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01
Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01 Open access at the University of Oxford by Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01
Ciro Santilli 35 Updated 2025-01-10 +Created 1970-01-01Things actually have gotten more and more closed, e.g. of stuff getting paywalled with time:
It appears that things got really bad starting in 2017, possibly when WebLearn was introduced. When things migrated to Canvas, they were closed by default, apparently with any mechanism to publish publicly.
Therefore, they managed to make things more closed than when teachers would just upload to good old
ox.ac.uk/~name static websites!!Ciro Santilli has also heard that some people in the Mathematical Institute of the University of Oxford opposed to moving away from their Moodle instance precisely because the new options did not support open publishing, so kudos to those people. But most teachers likely don't care and just do whatever is the best internally supported default.
Their "open" video material: podcasts.ox.ac.uk/ A somewhat small part is Creative Commons, but most proprietary. Despite the name "podcasts", they do contain video, it is just a relic.
podcasts.ox.ac.uk/open contains actual Creative Commons only it seems.
It does however appear that professors own their lecture notes, so there some hope maybe: governance.admin.ox.ac.uk/legislation/statute-xvi-property-contracts-and-trusts#collapse1383636
Talks: talks.ox.ac.uk/. Mathematical, Physical and Life Sciences (MPLS) subset: talks.ox.ac.uk/talks/department/id/oxpoints:23232639
Unlisted articles are being shown, click here to show only listed articles.