The aerodynamic center (AC) of an airfoil or aircraft is a crucial concept in aerodynamics. It is defined as the point along the chord line of an airfoil at which the aerodynamic forces (specifically lift and drag) are considered to act. At this point, the moment due to aerodynamic forces remains constant with changes in the angle of attack.
Articles by others on the same topic
The aerodynamic center is the reference point about which an airfoil's pitching torque is approximately independent of angle of attack over a stated flow regime. More generally the defining test uses the pitching-moment coefficient at fixed flow conditions. The aerodynamic center simplifies replacing a distributed pressure field by an aerodynamic force and a nearly constant residual torque. It differs from the center of pressure, where the resultant's pitching torque is zero and whose position can move as angle of attack changes.[ref]
A thin-airfoil model makes the distinction quantitative. Let be the airfoil chord, a reference area and the dynamic pressure. Define and . Take positive aft from the leading edge and positive pitching torque nose-up. In a chord-line lift model, moving the reference point givesConsequently, when ,Here is angle of attack; differentiating holds the other test conditions fixed. A vanishing lift slope or strongly changing slopes defeats this simple inference.
For an original model choose . Its aerodynamic center is , with . In contrast, setting the pitching torque to zero givesThe center of pressure moves from to as increases from to . With and , the aerodynamic center's residual pitching torque remains while lift doubles. At zero lift the nonzero pure torque cannot be represented by a finite lift application point.
A wind tunnel test can measure lift and pitching torque about a fixed support while stepping angle of attack. The measured slopes determine the inferred aerodynamic center; approximately flat moment data about that point test the model. NASA describes the quarter-chord position as characteristic of most low-speed airfoils. Flow separation, compressibility and three-dimensional wing geometry require their own assessment rather than transferring this location unchanged.[ref]