 Airfoil thickness-to-chord ratio

The airfoil thickness-to-chord ratio is the dimensionless maximum section thickness divided by the airfoil chord:Its percentage form is $100\eta$. The airfoil thickness convention must specify how upper and lower surface points are paired and in which direction their separation is measured. For the standard NACA four-digit airfoil construction, the prescribed thickness envelope is placed normal to the airfoil mean camber line, not simply added vertically everywhere.^[ref]

For an original scale example, $t_{\max }=24\mathrm{mm}$ and $c=200\mathrm{mm}$ give $\eta =0.12$, or twelve percent. Scaling every coordinate by three gives $72\mathrm{mm}$ thickness and $600\mathrm{mm}$ chord, with the same ratio. Holding the chord fixed while adding $0.2\mathrm{mm}$ thickness instead gives $\eta =0.121$: the percentage thickness rises by $0.1$ percentage point.

The differential relationshows why an identical fractional scale error in both lengths cancels to first order, while an independent thickness error survives. Exact common scaling cancels in the quotient itself. This is the geometric counterpart of a ratiometric measurement.

The scalar $\eta$ does not specify where the thickest station lies, the airfoil leading-edge radius, or the airfoil camber. Two sections can therefore share $\eta$ while having different pressure distributions and structural envelopes. The early NACA investigation varied thickness and mean-line form independently in a variable-density wind tunnel, making those distinctions experimentally useful.^[ref]

A geometric check of a manufactured section should report the chord reference, the thickness direction and the coordinate scale. Measuring a projected thickness in a tilted image without correcting its direction can change the reported ratio even when the physical section is unchanged.