 Gear friction work per engagement

Gear friction work per engagement is the mechanical energy dissipated by sliding during one tooth pair's active engagement. It is the time integral of that pair's gear sliding-friction loss:The result has units of joules, whereas instantaneous loss has units of watts. It excludes other gearbox losses such as support friction. Manufacturer efficiency guidance distinguishes meshing and support losses and emphasizes their dependence on operating conditions.^[ref]

For a fixed-axis external spur gear pair, let signed contact coordinate $s$ run from $-L_a$ to $L_r$ through the gear pitch point. Gear sliding velocity has magnitude $(|{\omega }_1|+|{\omega }_2|)|s|$. At constant shaft speeds, gear base-roll speed gives $ds/dt=u_b>0$ in this chosen direction. If $\mu$ and the force carried by this pair are constant,With hypothetical $\mu =0.05$, $F_n=100\mathrm{N}$, angular-speed sum75rad/s, $L_a=5.0586\mathrm{mm}$, $L_r=4.5960\mathrm{mm}$ and $u_b=0.93969m/s$, this gives about9.32mJ. Doubling both shaft speeds doubles instantaneous power but halves gear contact duration, leaving this idealized work per engagement unchanged. Real friction and load can themselves change with speed.

Gear tooth load sharing is essential when several pairs engage simultaneously. A constant total mesh load is not a constant full load on each active pair. If identical pair events recur at gear mesh frequency $f_m$, averaging their correctly modeled losses over many events gives $\overline{P}=f_m{E}_f$. The event's force history must already include load sharing; assigning the whole mesh load independently to every overlapping pair would overcount transmitted load and loss.