 Lift-to-drag ratio

The lift-to-drag ratio $L/D$ compares the lift supporting an aircraft with the drag opposing its motion. For $L>0$ and $D>0$, a larger ratio means less drag for a given lift. If both coefficients use the same dynamic pressure $q$ and reference wing area $S$, then $L/D=C_L/C_D$. Ratios using mismatched reference areas do not have this interpretation.

A parabolic drag polar provides a useful worked model:Here $C_{D0}$ is the zero-lift drag coefficient. In a simple finite-wing model, $k=1/(\pi eAR)$ relates lift-induced drag to wing aspect ratio and a span efficiency factor.^[ref] A fitted whole-aircraft $k$ can also incorporate additional effects; it need not be determined by geometry alone.

The maximum lift-to-drag ratio follows by differentiation:At this point the two modeled contributions to drag coefficient are equal. With the stipulated $C_{D0}=0.020$, $e=0.8$ and $AR=8$, $k\simeq 0.049736$, $C_L^{\ast }\simeq 0.6341$ and $(L/D{)}_{\max }\simeq 15.85$. The optimum is usable only if the actual wing can attain that lift coefficient in the regime where the model is valid; aerodynamic stall can intervene.

For steady unpowered descent in still air, the force balance gives $\tan \gamma =D/L$, where $\gamma$ is the glide angle. Thus the stipulated optimum corresponds to $\gamma \simeq 3.61{}^{\circ }$ and about $15.85$ units of horizontal travel per unit of height lost.^[ref] Wind and changing flight conditions alter travel over the ground. An airfoil section's ratio also should not be substituted for that of an entire aircraft, which includes other sources of drag.