 Mechanical driving-point mobility

Mechanical driving-point mobility is the frequency response relating motion to excitation at the same mechanical port. Using relative velocity $v$ and signed entering force $F$, its zero-initial-state Laplace transform convention iswhere $Z$ is the force/velocity mechanical driving-point impedance. Mobility has units $m/(\mathrm{N}\mathrm{s})$. The measured direction, port and boundary conditions are part of its specification.^[ref]

For an inertial element $b$, dashpot coefficient $c$ and spring stiffness $k$ sharing a port,For $e^{i\omega t}$ complex amplitudes, mobility tends to $i\omega /k$ at low frequency when $k>0$ and to $1/(i\omega b)$ at high frequency when $b>0$. A spring therefore prevents a nonzero steady drift response to constant force. This differs from the steady mechanical mobility of a body under pure linear drag, which has no elastic restoring term.

Take $b=2\mathrm{kg}$, $c=4\mathrm{N}s/m$ and $k=200N/m$. At $\omega =10rad/s$ the reactive terms cancel and $Y=0.25m/(\mathrm{N}\mathrm{s})$. A peak force amplitude $0.8\mathrm{N}$ gives peak velocity $0.20m/s$ and mean entering power $0.08\mathrm{W}$. These statements concern the same port; a response measured elsewhere is a transfer mobility.

A response/force ratio using acceleration instead is mechanical accelerance, $A/F=sY$; using displacement gives mechanical receptance, $X/F=Y/s$. Confusing these ratios introduces a frequency-dependent magnitude and phase error. With several coupled ports, matrix inversion rather than elementwise reciprocation is needed to exchange complete impedance and mobility descriptions.