 Mechanical receptance

Mechanical receptance is a displacement-to-force frequency response. With zero initial conditions, the Laplace transform convention is $H(s)=X(s)/F(s)$, with units $m/N$. Mechanical driving-point mobility is $Y=sH$ and mechanical accelerance is $s^{2}H$. The port, direction and boundary conditions must accompany the ratio.^[ref]

For a single-coordinate model $m\ddot{x}+c\dot{x}+kx=F$,Its inverse is mechanical dynamic stiffness. If $k>0$, the zero-frequency limit $H(0)=1/k$ agrees with static mechanical compliance. At finite frequency, inertia and damping change both magnitude and phase; replacing the denominator by $k$ would discard them.

For an original example, use $m=2\mathrm{kg}$, $c=4\mathrm{N}s/m$ and $k=200N/m$. At $\omega =10rad/s$, stiffness and inertia cancel, giving $H=-0.025im/N$. A peak force amplitude $0.8\mathrm{N}$ therefore gives displacement amplitude $0.020\mathrm{m}$, lagging force by a quarter cycle. Static displacement under the same force magnitude would be only $0.004\mathrm{m}$.

For sufficiently high frequency, this model has $H(i\omega )\sim -1/(m{\omega }^2)$, revealing an inertia-dominated response with a phase reversal. A mechanical impedance measurement can infer receptance from acceleration by dividing the acceleration/force response by $-{\omega }^2$ for nonzero $\omega$. This conversion becomes sensitive to low-frequency measurement errors and is not a substitute for specifying the actual displacement measurement or integration model. With multiple coupled coordinates, the receptance matrix is the inverse of the complete dynamic-stiffness matrix, rather than a collection of elementwise reciprocal entries.