 Solution

Johnson-Nyquist noise is equilibrium electrical fluctuation caused by thermal agitation of charge carriers. A resistor can generate a fluctuating terminal voltage even when its mean current is zero. In the classical frequency range $hf\ll k_{B}T$, the Fluctuation-dissipation theorem relates this noise to dissipative resistance. The one-sided voltage power spectral density of an unloaded resistor isEquivalently its short-circuit current spectrum is $4k_{B}T/R$. Over a flat bandwidth $B$ the rms voltage is $\sqrt{4k_{B}TRB}$. A real measurement instead integrates $S_V(f)|H(f){|}^2$ over positive frequency, with loading and the filter's effective noise bandwidth included. A flat spectrum does not imply an infinite physically measurable variance; the circuit and the quantum high-frequency regime limit the ideal white-noise model.

Cooling or narrowing the accepted bandwidth reduces thermal noise. Reducing resistance lowers its open-circuit voltage noise but raises its short-circuit current noise, so the appropriate choice depends on source impedance and amplifier loading. Thermal agitation is not a fluctuating externally applied voltage that can be removed by perfect shielding alone.

Shot noise arises from discrete transfer events. In the simplest shot noise counting model, equal charges $q$ arrive independently at constant rate $r$. A gate of duration $t$ contains a Poisson number $K$, with mean and variance $rt$. Therefore mean current is $I=qr$, and the averaged-current variance is $qI/t$. The corresponding one-sided low-frequency spectrum isfor a flat accepted bandwidth. Electron current has $q=e$. Vacuum emission or photodetection can approximate independent arrivals; correlations in a conductor can suppress or enhance the fluctuations. Discreteness by itself does not guarantee Poisson statistics.

For a fixed mean current the ideal shot-noise formula is not proportional to temperature, whereas Johnson noise is. Increasing current raises absolute shot noise but lowers its fractional size, since $\sqrt{2qIB}/I\propto I^{-1/2}$. Both can appear approximately white within a useful frequency band, and independent noise powers add after referring them to a common measurement point. Their spectra must use the same convention: two-sided densities are half these one-sided values. A real low-current experiment can also contain amplifier noise, low-frequency drift and correlated transfer noise, so a mean current or resistance alone does not specify its complete noise budget.