 Peltier coefficient

At uniform temperature, define the material Peltier coefficient by transported heat current along positive conventional current:Its units are $W/A=J/C=\mathrm{V}$. In one dimension, $q=\Pi j-\kappa dT/dx$, with electric current density $j$ and thermal conductivity $\kappa$. Here heat excludes the electrochemical potential contribution to total energy flux.^[ref]

Now orient positive conventional current $I$ from material A into material B, at a common junction temperature $T$. Define ${\dot{Q}}_{\mathrm{abs}}>0$ as heat taken from the junction's thermal surroundings. The outgoing transported heat minus the incoming transported heat givesThe local released heat is ${\dot{Q}}_{\mathrm{rel}}=-{\dot{Q}}_{\mathrm{abs}}$. Authors defining a junction coefficient by released heat therefore use the opposite sign. Exchanging A and B reverses the coefficient; reversing $I$ at fixed A and B reverses the junction's thermal response. An individual material coefficient and a junction difference are different quantities.

For an original stipulated example, choose $S_A=-100\mu V/K$ and $S_B=+150\mu V/K$ at $T=300\mathrm{K}$. The Kelvin thermoelectric relation gives ${\Pi }_A=-0.030\mathrm{V}$, ${\Pi }_B=+0.045\mathrm{V}$. A positive $2\mathrm{A}$ flowing A to B absorbs $(0.075\mathrm{V})(2\mathrm{A})=0.150\mathrm{W}$. A separate $0.010\Omega$ junction electrical resistance would dissipate $0.040\mathrm{W}$ for either direction. If all that dissipation heats the junction, its net absorbed power is $0.110\mathrm{W}$ forwards and $-0.190\mathrm{W}$ backwards. These numbers illustrate a chosen thermal accounting boundary, not measured material data or a universal allocation of contact heating.