 Platinum resistance thermometer

A resistance thermometer using platinum as its sensing material. It provides the temperature readout in the saturation-pressure equilibrium measurement.

Transduction turns electrical resistance into a temperature indication. A uniform wire has $R={\rho }_{\mathrm{el}}\ell /A$, with electrical resistivity ${\rho }_{\mathrm{el}}$, length $\ell$, and cross-sectional area $A$. Stronger atomic vibrations at higher temperature scatter Electrons more, increasing platinum's electrical resistivity; impurities and crystallographic defects also contribute.^[ref]

A small known electric current $I$ and measured electric potential difference $V$ give $R=V/I$ through Ohm's law; a resistance bridge can instead compare the element with a reference resistor. Inverting the calibrated response then gives the sensing element's temperature. This makes electrical readout convenient, but the platinum resistance thermometer lead resistance error, resistance thermometer self-heating, and resistance thermometer immersion test explain why a stable display alone is insufficient. The gas thermometer supplies a contrasting route through an equation of state; the saturation-pressure equilibrium measurement shows why a trustworthy independent temperature readout matters.