 Section orientation

Section orientation specifies how a cut is directed relative to a specimen or reference coordinate system. A flat cut is described by a unit normal vector $\mathbf{n}$, together with an in-plane direction when image axes matter. Reversing $\mathbf{n}$ leaves the unoriented plane unchanged, although choosing a normal direction is useful for ordering an image stack. Section orientation affects which structures intersect a section and their apparent dimensions, even without deformation.

An original layered-material example complements the circular-fibre geometry in microtomy. Model parallel interfaces in a polymer laminate bywhere $\mathbf{m}$ is a unit normal vector to the layers and $L$ is their true normal spacing. Let $\varphi$ be the acute angle between the layer normal $\mathbf{m}$ and the section normal $\mathbf{n}$. For $0<\varphi \le \pi /2$, the orthogonal projection of $\mathbf{m}$ into the section has length $\sin \varphi$. Its unit direction isMoving distance $d$ along $\mathbf{q}$ changes $\mathbf{m}\cdot \mathbf{r}$ by $d\sin \varphi$. Hence adjacent interface traces in the section are separated byFor chosen $L=2\mu \mathrm{m}$ and $\varphi =30^{\circ }$, their apparent spacing is $4\mu \mathrm{m}$. At $\varphi =90^{\circ }$, the section contains the layer normal and $d=L$. At $\varphi =0$, the section is parallel to the layers and does not show this family of separated interface traces; the spacing formula has no finite value there.

A useful physical check sections a reference laminate at known orientations, images it with an optical microscope using established length calibration, and measures trace spacing perpendicular to the traces. Recording orientation prevents an oblique cut from being mistaken for a change in layer spacing. The ideal calculation assumes flat interfaces, negligible physical section thickness and no cutting distortion. Manufacturer materials guidance explicitly discusses polymers and composite materials, as well as compression during sectioning.^[ref] Those physical effects must be assessed separately from the geometric prediction.