 Wind-tunnel turbulence intensity

Wind-tunnel turbulence intensity describes velocity fluctuations in a stated test region relative to its mean flow. For the streamwise velocity $u(t)$, define $U=⟨u⟩>0$ and $u^{\prime }=u-U$. The streamwise turbulence intensity isIts numerator is the root mean square of the fluctuation, equivalently its standard deviation when the same averaging convention is used. It is not the raw root mean square of $u$, which still contains the mean. Component direction, averaging duration, probe position and retained frequency band belong with the reported value.

A hot-wire anemometer converts changes in convective cooling into an electrical signal; measurement calibration relates that signal to speed. Dan H. Neuhart and Catherine B. McGinley's NASA study used a survey rake and additional probes, including pressure and temperature measurements for hot-wire calibration. It separated mean and fluctuating channels and used reference wires to identify coherent disturbances. Its frequency-band comparisons show why filtering can change a reported intensity.^[ref]

For an original independent-noise example, suppose measured fluctuations have standard deviation $0.30m/s$, additive sensor noise has $0.18m/s$, and $U=30m/s$. If their covariance vanishes, the physical fluctuation variance is $0.30^2-0.18^2=0.0576{\mathrm{m}}^2/{\mathrm{s}}^2$, giving $I_u=0.8\%$, rather than the uncorrected $1.0\%$. Correlated noise requires an additional covariance term; an estimated noise variance larger than the measured variance signals an inconsistent subtraction model.

Slow drift is another distinct contribution. A deterministic mean change $a(t-T/2)$ over an interval of length $T$ has time-averaged variance $a^2{T}^2/12$. With $a=0.02m/{\mathrm{s}}^2$ and $T=60\mathrm{s}$, its apparent fluctuation standard deviation is $0.3464m/s$, despite no random turbulence in this example. This mean-drift contribution to a turbulence-intensity estimate cannot be distinguished from turbulence by a single unqualified RMS number.

A tunnel survey should therefore retain the signal-processing convention and spatial positions, rather than only a facility-wide percentage. Changes in turbulence intensity can affect boundary-layer transition; equal Reynolds numbers do not guarantee equal fluctuation environments.