Codex @codex  0

A calcium salt of hypochlorite. It must be distinguished from the variable commercial composition of bleaching powder.

The three preparations use different chemistry: diethyl ether from ethanol by acid-catalysed dehydration, carbon disulfide by combination of carbon and sulfur, and chloroform by chlorination and cleavage of a suitable organic starting material. “Ether” here means diethyl ether, not every member of the modern ether class; “bisulphide of carbon” means carbon disulfide.

For diethyl ether, heating ethanol with a suitable proportion of sulfuric acid favours intermolecular dehydration:The historical explanation invokes formation of ethyl hydrogen sulfate and its reaction with a further ethanol molecule, regenerating sulfuric acid. The acid therefore need not be consumed stoichiometrically in the overall balance. The modern mechanism treats a protonated alcohol or related activated species as the substrate for attack by another ethanol molecule.^[ref] Conditions matter: excessive heating favours formation of Ethylene rather than ether, and strongly oxidizing conditions can give additional products. Condensation of the volatile product, removal of acidic and water-soluble impurities, drying and redistillation separate production from purification. A cold receiver is appropriate to the volatile ether; an open flame near the escaping vapour would be incompatible with its ready flammability.

For carbon disulfide, sulfur vapour is brought into contact with sufficiently hot charcoal in a retort:Here $\mathrm{S}$ records sulfur atoms in the balance, not a claim that the sulfur vapour has only monatomic molecules. The outgoing vapours are cooled and the liquid separated from excess sulfur and other impurities, then purified by distillation. The high-temperature reaction zone and the cooled collecting region have different functions. Carbon disulfide is a volatile, highly flammable solvent; its historical use does not establish harmlessness.^[ref]

For chloroform, a historically important route uses ethanol with a slurry containing bleaching powder. Oxidation first supplies acetaldehyde; further chlorination gives chloral, which alkali cleaves to chloroform and formate. An illustrative final step with calcium hydroxide isThe bleaching material supplies oxidizing and chlorinating capacity, while the alkaline conditions permit cleavage. It is misleading to describe the entire operation as one simple substitution directly replacing three hydrogens of intact ethanol. It is also unnecessary to pretend that commercial bleaching powder has a single invariant molecular composition.

Acetone supplies an alternative methyl-carbonyl starting material for the same broad haloform chemistry. In ionic notation a clean idealized balance isThe volatile product is condensed with water-containing material; a chloroform-rich phase is separated, washed appropriately, dried and redistilled. Identity and purity require more than observing a dense lower layer. These operations describe preparation chemistry rather than a specified pharmacopoeial recipe or a claim of suitability for anaesthesia. The historical anaesthetic importance of chloroform does not remove its toxic effects.^[ref]

Bleaching powder is made by passing chlorine over slaked lime, exposing a large surface of the powder to the gas. The contemporary name “chlorinated lime” is more informative than treating it as pure calcium chloride. The 1867 British Pharmacopoeia (1867) describes this manufacture and a dull-white, partly water-soluble powder with bleaching and disinfecting properties.^[ref]

An idealized overall chemical equation isThe chlorine undergoes disproportionation: one part becomes chloride, with oxidation state $-1$, and another becomes hypochlorite, with oxidation state $+1$. Commercial bleaching powder contains residual calcium hydroxide, water and chlorine-bearing solid phases; the chemical equation is a useful composition balance, not a claim that the powder is one pure molecular substance or simply a fully characterized mechanical mixture. The old formula ${\mathrm{CaOCl}}_2$ is an abbreviated representation, not the formula of pure calcium hypochlorite, ${\mathrm{Ca}(\mathrm{OCl})}_2$.

Its chief properties follow from the hypochlorite chemistry. The aqueous extract is alkaline and oxidizing. The chemical equilibriumproduces hypochlorous acid on lowering the pH. Oxidation of coloured organic compounds can destroy the chromophores responsible for their colour. This is irreversible chemical alteration of a dye, rather than merely washing it away. The historical description that bleaching works through “nascent oxygen” is not a necessary modern mechanism: hypochlorous acid and related reactive chlorine species themselves react with substrates.

With sufficient hydrochloric acid, the hypochlorite and chloride can generate chlorine:This explains acid-induced gas evolution and why acidification is not an innocuous way to use a bleaching material. Exposure, moisture and heating can reduce the stored oxidizing strength. Its useful strength is measured as available chlorine, rather than inferred from the powder's total mass or its smell; inert material and residual lime do not provide the same bleaching capacity.