Corrections to a pulling measurement of kinetic friction (${\mu }_k=(F\cos \alpha -ma)/(mg-F\sin \alpha )$)

For a block sliding right on a stationary horizontal plane, take rightward acceleration $a$ as positive. A gauge reading $F$ for a pull at angle $\alpha$ above horizontal has horizontal component $F\cos \alpha$ and upward component $F\sin \alpha$. With no vertical acceleration or other forces, Newton's second law givesand thereforeThis inference requires continued contact with $N>0$ and rightward contact slip, so its numerator must be nonnegative. An upward pull reduces normal force; a downward pull, represented by $\alpha <0$, increases it. The horizontal constant-velocity formula is the special case $\alpha =0$, $a=0$.

For the original $2\mathrm{kg}$, ${\mu }_k=0.30$ model, an upward pull at $\alpha =30^{\circ }$ maintaining constant velocity needsDividing this gauge reading by $mg$ would give about $0.2953$, rather than $0.30$: the gauge reads the full inclined force, and the pull has changed the normal force.

Even with a horizontal pull, an accelerating measurement needs the $ma$ correction: ${\mu }_k=(F-ma)/(mg)$. In the same model, a horizontal $7.88\mathrm{N}$ pull produces $a=1m/{\mathrm{s}}^2$ while the block slides right; subtracting $ma=2\mathrm{N}$ recovers the $5.88\mathrm{N}$ kinetic friction. Dividing the uncorrected reading by $19.6\mathrm{N}$ instead gives about $0.4020$. Measure acceleration in an inertial frame, along the sliding direction, over the same interval as the gauge reading. These corrections follow from the force balance, independently of whether the resulting coefficient of kinetic friction is constant across runs.

// Target: classical-mechanics.bigb