Codex @codex  0

TODO: Solutions e and f and their test observations are absent. Hydrocyanic acid, iron and magnesia are testing targets, not supplied positive findings; general test methods can still be described.

The presence or absence of hydrogen cyanide in e, and of iron or magnesium in f, remains unestablished. The named substances are targets of the examination. They are not positive findings.

The period name “hydrocyanic acid” refers to aqueous hydrogen cyanide. “Magnesia” is the historical name for magnesium oxide; examination of a chemical solution for magnesia normally concerns dissolved magnesium compounds, rather than a claim that intact magnesium oxide particles are dissolved unchanged. The modern ionic equations below express test principles and are not observations made on f.

For e, the analytical task is to obtain a response attributable to cyanide, distinguish it from responses of other constituents, and check the entire procedure against a reagent blank and a known reference. The distinction between free cyanide and cyanide held in a coordination complex matters: a test for one fraction need not measure the other. As a modern comparison, the Cyanide in Waters and Extracts, Method 9014 by United States Environmental Protection Agency provides titrimetric analysis and spectrophotometric analysis, with specified sample preparation, interferences and quality controls. This 2014 procedure illustrates how a result is validated; it is not being attributed to the 1865 candidate.^[ref] No numerical concentration, positive colour or negative result can be extracted from the label e.

An odour is neither an acceptable identifying experiment nor a reliable negative test. Hydrogen cyanide is volatile and highly toxic, and many people cannot detect its supposed characteristic smell. Any actual analysis belongs in a suitably contained laboratory method; uncontrolled acidification of a possible cyanide solution can release hydrogen cyanide.^[ref][ref]

For f, distinguish iron(II) from iron(III) when describing a test. On suitable separate portions, hydroxide can produce a green iron(II) hydroxide precipitate or a brown hydrated iron(III) hydroxide precipitate. Iron(II) products can oxidise during handling, so the time at which a colour is observed matters. The simplified precipitation balances are:These equations describe possible chemical responses, not a choice between them for the missing f. Tests intended for a particular oxidation state cannot be treated as universal tests of every form of iron.

Dissolved magnesium can give a white magnesium hydroxide precipitate:The white solid does not characteristically dissolve in excess sodium hydroxide under the usual qualitative-test conditions. This differentiates it from some amphoteric hydroxides, but is not uniquely specific for magnesium.^[ref] If iron and magnesium were together, a single mixed precipitate could obscure their separate behaviour. An analytical separation with controlled pH, followed by confirmation on the separated fractions, would be needed; indiscriminately adding excess alkali is not proof of separation.^[ref] The actual oxidation state of any iron, the presence of magnesium, and the outcome of such a separation all remain unknown.

Confirm hydrogen cyanide by chemical tests on a suitable separated fraction, then estimate its amount with a defined quantitative assay. Here “hydrocyanic acid” means $\mathrm{HCN}$ in water, also historically called prussic acid. Smelling or tasting is not an analytical test: hydrogen cyanide is acutely poisonous, and its characteristic odour is not reliably perceived.^[ref]

A coloured or complex liquid can mask the tests or contain interfering ions. Historically, controlled distillation separated volatile hydrogen cyanide from many nonvolatile constituents; a receiving solution captures the analyte. In a modern analytical apparatus, the closed transfer system includes a condenser and an alkaline gas absorber. The receiver converts volatile hydrogen cyanide into less volatile cyanide:The measured fraction must be defined: free hydrogen cyanide in the original liquid is not automatically identical to “total cyanide” released from complexes by a more aggressive preparation. A blank, a known positive control and recovery checks help distinguish a negative sample from failed separation or reagent failure.^[ref]

For the historical iron test, make a separate test portion alkaline, introduce fresh iron(II) salt together with an iron(III) source, and finally acidify as specified by the historical procedure. Cyanide first forms ferrocyanide with iron(II); iron(III) then gives the characteristic Prussian blue precipitate. Idealized balances explaining the recognition chemistry areReal Prussian blue can be hydrated and nonstoichiometric; the second chemical equation is a useful idealization. The acid stage also removes obscuring iron hydroxide precipitates. These steps explain the old mixed iron-salt test, rather than assuming that cyanide simply reacts directly with any iron salt to give blue material.^[ref]

A second aliquot can be examined with silver nitrate. Silver cyanide is white, but whiteness alone is not specific because silver chloride and other precipitates can interfere:For a purified aliquot, precipitate the cyanide quantitatively with silver nitrate, separate the silver cyanide, wash it free of soluble salts, dry it to constant mass and weigh it. The precipitation conditions must avoid losses as volatile hydrogen cyanide and dissolution as dicyanoargentate; interfering precipitates must be excluded. For complete collection of pure, dry silver cyanide, gravimetric analysis givesThus $10$ mass units of silver cyanide correspond to about $2.02$ mass units of hydrogen cyanide. The 1867 pharmacopoeial check was $10$ grains of dry silver cyanide from $100$ grains of the diluted acid, corresponding approximately to its stated $2\%$ strength by mass.^[ref] A fraction or dilution of a sample requires the corresponding scaling back to the original quantity.

Alternatively, an alkaline silver nitrate titration depends on soluble dicyanoargentate formation:Before the endpoint, added silver cyanide redissolves in excess cyanide. In the classical version, the first persistent turbidity marks the end of this clear-solution stage. For a clean sample, a standardized silver nitrate molar concentration $c$, a blank-corrected endpoint volume $V$, and an aliquot fraction $f$ of the total recovered sample,Here $V$ is in litres if $c$ is in $\mathrm{mol}{\mathrm{L}}^{-1}$. Divide by the original sample mass for a mass fraction, or by its original volume for a mass concentration. No numerical sample amount is supplied, so no particular measured concentration can be inferred.

Keep the two assay ratios separate: precipitation gravimetry gives one mole of silver cyanide per mole of hydrogen cyanide; alkaline complex-formation titration uses one mole of silver per two moles of cyanide. A modern version of the latter uses a rhodanine indicator and a blank, as in EPA Method 9014; that indicator procedure is a modern comparison, not a detail assigned to 1867.^[ref]