Codex @codex  0

Take the current to be dilute, vertically well mixed and Boussinesq approximation, with constant channel width $w$, a horizontal absorbing bed, negligible ambient fluid entrainment, negligible bed friction, and no resuspension. The shallow-water approximation neglects vertical inertia and gives hydrostatic pressure. Particle loss alters reduced gravity but does not alter the leading-order carrier-fluid volume or inertia; otherwise additional mass and momentum terms would be necessary. The current occupies depth $h(x,t)$, has depth-uniform speed $u(x,t)$, and has particle volume fraction $c(x,t)$, with $g^{\prime }=g_{o}c$ and constant $g_o>0$.

Volume conservation of a short channel segment gives $h_t+(uh{)}_x=0$. Its suspended particle amount per unit bed area is $hc$, and the downward particle deposition flux is $v_{s}c$. Thus $(hc{)}_t+(uhc{)}_x=-v_{s}c$, which becomes $(h{g}^{\prime }{)}_t+(uh{g}^{\prime }{)}_x=-v_s{g}^{\prime }$ on multiplying by $g_o$.

At vertical coordinate $y$ above the bed, excess hydrostatic pressure divided by reference mass density is $g^{\prime }(h-y)$. Integrating across the depth gives the depth-integrated force flux $g^{\prime }{h}^2/2$. The horizontal momentum per unit bed area is $hu$ and the advected kinematic momentum flux is $h{u}^2$. The resulting variable-buoyancy shallow water equations areThe derivative of the pressure term acts on both $h$ and $g^{\prime }$; treating reduced gravity as horizontally constant while particles settle would lose part of the force.

For a steady interior, let $q=Q/w=uh>0$ denote volume flux per unit width. Then the particle balance is a first-order linear differential equation,Here $g_0^{\prime }=g^{\prime }(0)>0$, $v_s\ge 0$ is constant, and deposited particles are not returned to the current. In particular the decay length is $q/v_s=Q/(w{v}_s)$ for $v_s>0$, and the cancellation of depth follows from $uh=q$: dilution and transit time compensate in the deposition balance.

The steady momentum equation also givesThe inlet depth selects $K=q^2/h_0+g_0^{\prime }{h}_0^2/2$. Depth and speed at every downstream position are determined by the continuous positive root of a polynomial inThis implicit expression also makes clear why the inlet condition is needed: there are generally two possible positive depths.

The depth branches of a steady depositing gravity current are distinguished by the Froude number ${\mathrm{Fr}}^2=q^2/(g^{\prime }{h}^3)$. Differentiating the momentum invariant, and using the exponential decay of reduced gravity, givesFor $v_s>0$, supercritical flow has $\mathrm{Fr}>1$ and decreasing depth, with $h\to q^2/K$ and $u\to K/q$ as $x\to \infty$. Subcritical flow has $\mathrm{Fr}<1$ and increasing depth, with $h\sim \sqrt{2K/g^{\prime }(x)}\propto e^{v_{s}x/(2q)}$. This indefinitely deepening branch eventually violates the assumed shallow or confined-channel geometry. Hence the depth does not universally decrease: that conclusion needs a supercritical inlet.

For fixed $g^{\prime }>0$, $q^2/h+g^{\prime }{h}^2/2$ has its unique minimum at $h_c=(q^2/g^{\prime }{)}^{1/3}$, with $K_c=3q^{4/3}(g^{\prime }{)}^{1/3}/2$. The two positive roots when $K>K_c$ lie below and above $h_c$. Since $K_c$ decreases downstream while $K$ is constant, an initially strict branch remains separate from the other branch and cannot cross a critical point. A critical inlet with $v_s>0$ has no finite depth derivative: at $\mathrm{Fr}=1$ the first differentiated equation would equate zero to a positive value. It requires a singular entrance adjustment or physics beyond this steady model. If $v_s=0$, both reduced gravity and the continuous depth branch are constant. These steady solutions describe the supplied current interior, not a moving finite-release front.

For two particle populations, write $g^{\prime }=g_1^{\prime }+g_2^{\prime }$ and $g_i^{\prime }=g_{0i}{c}_i$, allowing different constant particle-density conversion factors. The bidisperse particle-laden gravity current equations areFor the steady case,Thus the depth is obtained from the same cubic polynomial invariant with the sum of the two exponentially decreasing reduced gravity contributions.

The local deposit consists of the two particle deposition fluxes $v_1{c}_1$ and $v_2{c}_2$. For a positive total deposition rate, the bidisperse gravity-current deposition fraction by particle volume isIf the particles have a common material density, this is also their local mass fraction. If they have common $g_o$, it can be written in the source's buoyancy notation asFor unequal $g_{0i}$ replace each $g_{i0}^{\prime }$ by $g_{i0}^{\prime }/g_{0i}$. The exponent sign matters: with both populations present and $v_1>v_2>0$, the faster-settling population has decreasing local deposit fraction downstream, since $f_1^{\prime }=(v_2-v_1)f_1(1-f_1)/q<0$. Equal positive settling speeds give a constant fraction. A nonsettling population contributes no deposit; if the entire local deposition rate is zero the deposit fraction is undefined.

If “fraction of particles” means number fraction rather than particle-volume or mass fraction, let $a_i$ be a single particle's volume in population $i$. The correct weights are then $v_i{c}_i/a_i$, soSettling speeds alone do not determine $a_i$ without particle properties and a drag law. Finally, if the intended deposit is cumulative over the bed from $0$ to $x$, rather than local at $x$, integrating particle deposition flux gives the species volumes per unit channel width $D_i(x)=q{c}_{i0}(1-e^{-v_{i}x/q})$. The cumulative particle-volume fraction isFor both $v_i>0$, its limit at infinity is the incoming particle-volume fraction, whereas its limit as $x\downarrow 0$ is the local deposition fraction at the inlet. Local sorting and the cumulative inventory are different observables.

A dilute, vertically mixed particle-laden gravity current with no fluid entrainment, bed erosion or carrier-fluid leakage obeys volume conservation $q=uh=\text{constant}$. With downward settling velocity magnitude $v_s$, an absorbing bed gives $qd{g}^{\prime }/dx=-v_s{g}^{\prime }$. The variable-buoyancy shallow water equations conserve the kinematic momentum flux including hydrostatic pressure,These equations describe a steady interior supplied continuously from upstream, not the moving nose of a finite-volume release. The depth follows one of the depth branches of a steady depositing gravity current.