Gear base circle ($d_b=d\cos \alpha$)

A gear base circle is the fixed circle from which an involute tooth flank is generated. Imagining a taut string unwinding from that circle, the free end traces the involute. It is a geometric construction for the tooth shape, distinct from the gear reference circle used for sizing and the operating pitch circle describing a particular meshing pair.^[ref]

For base radius $r_b$ and unwinding parameter $u\ge 0$, one orientation of the involute isSquaring and adding gives $r=\sqrt{x^2+y^2}=r_b\sqrt{1+u^2}$. The local pressure-angle relation $\tan \alpha =u$ therefore gives $r_b=r\cos \alpha$. At the gear reference circle, this becomesFor reference diameter $d=60\mathrm{mm}$ and reference gear pressure angle $20{}^{\circ }$, the base diameter is $56.382\mathrm{mm}$, approximately. A change in mounting separation does not change this base diameter or the cut tooth profile; it changes which operating geometry describes the mesh.

In a compatible external pair, a common tangent to the two gear base circles is the gear line of action. Their fixed geometry gives $r_{b1}+r_{b2}=a\cos {\alpha }_w$, explaining why the operating pressure angle changes when $a$ changes. Repeating a tooth profile every $2\pi /N$ also gives gear base pitch $p_b=\pi d_b/N$ along the base circumference. Finally, an ideal involute generated this way lies on or outside its gear base circle; a real tooth's lower connecting portion can have a different shape. The gear base circle is not a physical boundary of the gear material.