Past exam of the viscous flow course of the University of Oxford / 2023 / 3 / a

The flat plate moves tangentially and the curved plate is stationary. The no-slip boundary condition and no-penetration boundary condition giveAt the curved plate, impermeability can also be written $w=u{h}_x$; together with zero tangential velocity, this gives both components zero. The native PDF writes $v^{\prime }=0$ in the scaled wall conditions although the normal component is defined as $w^{\prime }$. We use $w^{\prime }$ consistently.

The parabolic lubrication gap changes by order $h_0$ when $x^2/R$ is order $h_0$. Its natural horizontal scale is thereforeThe proposed normal velocity scale $h_{0}U/L$ then makes the two terms of the continuity equation comparable. Balancing the horizontal pressure gradient against the transverse viscous term in the Navier-Stokes equation requires $P/L=\mu U/h_0^2$, soHere pressure is measured from a common reference value, which is chosen at the outer fluid in part (b).

For clarity, define the dimensionless material derivativeSubstitution of all the scalings gives the exact dimensionless equationsFor example, the factor in the last left side is obtained by dividing the vertical acceleration scale $\rho h_0{U}^2/L^2$ by the vertical pressure gradient scale $P/h_0$.

Taking $\delta \ll 1$ and ${\delta }^2\mathrm{Re}\ll 1$ leaves the lubrication approximationThe scaled gap and boundary conditions areThe Reynolds number itself need not be small: it is ${\delta }^2\mathrm{Re}$ that measures inertia relative to transverse viscous resistance in this thin geometry.