If lower initial concentration is less than upper concentration , the entropy solution expands into a fan with . Its characteristic speeds range from to . The fan can be clipped by a clearing or deposition shock.
Consider normalized initial concentration above and below it, with , in the quadratic hindered-settling flux model. The final packed height is . The last surviving characteristic of a settling fan lies inside the fan only if
The upper inequality gives ; the lower gives . Thus both front curves can be used through the final meeting only for .
If , the deposition front leaves the fan through its upper edge before meeting the clearing front. It then travels through uniform concentration at speed ; the clearing front stays straight. If , the clearing front instead leaves the lower edge first, while the deposition front stays at speed . Matching the appropriate straight and curved pieces gives
The expressions agree at the transition values. The bounds prevent an algebraic intersection of extrapolated curves from being mistaken for a physical meeting inside the settling rarefaction fan.
For the quadratic hindered-settling flux, let the initial normalized concentration be below and above it, within a column . The internal settling rarefaction fan has
Before entering the fan, the upper clearing front follows and the lower deposition front follows . They reach the fan at respective times and .
Inside the fan, the Rankine-Hugoniot condition gives
Integrating these linear ordinary differential equations and matching to the entry events yields
where and . Each curve applies only after that front enters the fan and while its adjacent concentration lies between and . If a front leaves the fan, its subsequent speed is set by the uniform state it encounters, rather than by extrapolating these curves.
Suppose both curved settling fronts within a rarefaction fan meet while still inside the fan. Write and , where are the initial normalized concentrations below and above . Setting gives
At that point the fan concentration is
The final surviving characteristic curve runs from the initial internal interface to the meeting point. Its concentration must satisfy . Failure of either bound means that a front leaves the fan before final deposition, requiring another branch of the entropy solution.
The meeting height reduces to , agreeing independently with particle-volume mass conservation for a unit-normalized packed deposit.

Articles by others on the same topic (0)

There are currently no matching articles.