Wall friction in the Navier slip boundary condition (${\mathcal{D}}_w=\mu u_{\mathrm{rel}}^2/b$)

For a Newtonian fluid and a flat wall with $0<b<\infty$, the Navier slip boundary condition is equivalent to a tangential wall-on-fluid tractionThe sign expresses resisting friction: ${\partial }_{n}u$ uses the inward unit normal, whereas the wall-on-fluid traction uses the outward unit normal of the fluid domain. The irreversible loss of mechanical energy per unit wall area and time isFor two tangential directions replace $u_{\mathrm{rel}}^2$ by the squared Euclidean norm of relative tangential velocity. At a moving wall this relative-velocity loss must be distinguished from the power supplied by the wall's motion. Bulk viscous dissipation also remains present. A finite slip length models reduced interfacial resistance, without declaring every boundary ideal or removing dynamic viscosity.

The limiting loss depends on how the flow is driven. In Couette flow with a slipping lower wall,It tends to zero for both $b\to 0$ and $b\to \infty$ at fixed $H$ and $U$. At $b=0$ impose the no-slip boundary condition directly, rather than dividing by zero. In planar Poiseuille flow with equal wall slip at fixed $G$, each wall instead dissipates $G^{2}b{H}^2/(4\mu )$, which grows with $b$ because relative velocity grows. The bulk loss per unit width is $G^2{H}^3/(12\mu )$; adding both wall losses gives $Gq$, the pressure work per unit channel length and width. This energy balance shows why small friction coefficients do not guarantee small losses under every driving constraint.