Wing taper ratio ($\lambda =c_t/c_r$)

The wing taper ratio $\lambda$ is the tip airfoil chord $c_t$ divided by the root airfoil chord $c_r$:It describes the relative narrowing of a wing planform toward its tips. A rectangular wing has $\lambda =1$; a straight-edged triangular wing has $\lambda =0$. The ratio specifies two chord values, not the entire spanwise chord distribution.^[ref]

For a symmetric trapezoidal wing planform with wingspan $b$, the chord varies linearly on each half-wing:Integrating this expression gives wing areaFor a prescribed wing area and wingspan, the required chords are thereforeFor example, $S=20{\mathrm{m}}^2$, $b=10\mathrm{m}$ and $\lambda =1/3$ give $c_r=3\mathrm{m}$ and $c_t=1\mathrm{m}$. At $y=2.5\mathrm{m}$ the chord is $2\mathrm{m}$. A rectangular wing with the same wing area and wingspan instead has $2\mathrm{m}$ chord everywhere.

Changing wing sweep while preserving these chord lengths leaves the wing taper ratio unchanged. Curved or compound edges can also share the same root and tip chords while enclosing different wing areas. Consequently the trapezoidal area formula requires the stated straight-edge assumption; a taper ratio alone cannot supply a general area or a prediction of lift.