Gear

A gear is a toothed mechanical element that transmits motion and torque through contact with another gear or a rack and pinion. The teeth maintain a prescribed relation between the motions: unlike a smooth friction drive, the ideal gear ratio is set by geometry and tooth counts. The gear pitch circle supplies an imaginary rolling geometry for describing that relation; it is not the circle through the tooth tips.^[ref]

For two external gears on fixed parallel axes, let $N_1,N_2$ be their tooth counts and let signed angular velocities ${\omega }_1,{\omega }_2$ use the same orientation. Each tooth on one gear must pass a tooth space on the other, so counting tooth passages givesThus a 20-tooth input driving a 40-tooth output makes the output turn half as fast in the opposite direction. An input of $1200$ revolutions per minute gives an output of $600$ revolutions per minute in magnitude. These signs describe an external pair; a rack and pinion instead converts rotation into translation.

The useful trade is between angular speed and torque. In an ideal steady transmission, conservation of energy equates input and output power, $|{\tau }_1{\omega }_1|=|{\tau }_2{\omega }_2|$. The same 20-tooth/40-tooth pair therefore turns an input torque of $2\mathrm{N}\mathrm{m}$ into an output torque of $4\mathrm{N}\mathrm{m}$ while halving angular speed. This does not create energy: more torque accompanies less angular displacement per input revolution. Real gears dissipate energy through friction, and backlash permits a small lost motion on reversal; tooth strength and bearings, rather than the gear ratio alone, determine allowable load.