 Mechanical dynamic-stiffness matrix

A mechanical dynamic-stiffness matrix maps displacement coordinates to applied forces in a linear structural dynamics model at a specified transform variable or frequency. Starting with constant mass matrix $\mathbf{M}$, damping matrix $\mathbf{C}$ and mechanical stiffness matrix $\mathbf{K}$,zero initial conditions give $\mathbf{F}(s)=\mathbf{D}(s)\mathbf{X}(s)$ with $\mathbf{D}=s^2\mathbf{M}+s\mathbf{C}+\mathbf{K}$. For the $e^{i\omega t}$ convention, $\mathbf{D}(i\omega )=\mathbf{K}-{\omega }^2\mathbf{M}+i\omega \mathbf{C}$. Its matrix inverse, when it exists, is the complete mechanical receptance matrix. Models and measured responses must use matching coordinates and boundary conditions.^[ref]

Consider two $1\mathrm{kg}$ masses, each grounded by a $100N/m$ spring and joined by another $100N/m$ spring, with no damping. At angular frequency $5rad/s$,A force amplitude $F_1=1\mathrm{N}$ with $F_2=0$ gives $X_1=175/20625\mathrm{m}\approx 8.485\mathrm{mm}$ and $X_2=100/20625\mathrm{m}\approx 4.848\mathrm{mm}$. Clamping coordinate2 instead gives $X_1=1/175\mathrm{m}\approx 5.714\mathrm{mm}$, because the clamp supplies a reaction force.

Partitioning retained and internal coordinates gives mechanical dynamic condensation. With ${\mathbf{F}}_i=0$ and invertible ${\mathbf{D}}_{ii}$,The effective matrix is a Schur complement, generally frequency dependent even when the original mass matrix, damping and mechanical stiffness matrix are constant. In the example its scalar value is $175-100^2/175\approx 117.857N/m$, rather than175. A reduced force-free internal coordinate and a clamped coordinate describe different experiments. At a singular block, that particular elimination is unavailable; it does not establish that the full mechanical system lacks a valid solution.