 Negative melting-point slope of water

For a local illustrative ice–water melting calculation, stipulate $T_m=273.15\mathrm{K}$, latent heat of fusion $L=334\mathrm{kJ}\mathrm{k}{\mathrm{g}}^{-1}$, solid mass density ${\rho }_s=917\mathrm{kg}{\mathrm{m}}^{-3}$, and liquid mass density ${\rho }_l=1000\mathrm{kg}{\mathrm{m}}^{-3}$. These are explicitly stipulated rounded inputs, not measurements made here. The specific volume change on melting isThe common-pressure melting-point slope therefore givesA small $1\mathrm{MPa}$ increase in the common pressure thus lowers the melting temperature by about $0.074\mathrm{K}$ in this local model. Positive latent heat does not force a positive phase coexistence curve slope: ice contracts on conversion to liquid water. Increasing pressure favors the smaller specific volume. This calculation compares equilibrium states of the same two thermodynamic phases; extending its tangent to large pressures would require updated mass densities, latent heat of fusion, and the relevant ice phase diagram.