 Solution

For an experimental-noise interpretation of Nyquist's theorem, a resistor $R$ in thermal equilibrium at temperature $T$ has one-sided open-circuit voltage-noise spectral densityin the classical range $hf\ll k_{B}T$, over an approximately rectangular bandwidth $\Delta f$. Across a matched load, half the open-circuit voltage appears, giving available noise power $k_{B}T\Delta f$. This is thermal agitation, present without a mean current, and is distinct from shot noise. A real readout weights the spectrum with its transfer function: $⟨v_{\mathrm{out}}^2⟩={\int }_0^{\infty }{S}_V(f)|H(f){|}^{2}df$. Cooling, reduced bandwidth and suitable impedance/noise matching reduce measured noise; the resistor's noise does not simply disappear in an ideal amplifier model.^[ref]

The bare name also has a sampling interpretation. The Nyquist–Shannon sampling theorem permits exact reconstruction of a bandlimited signal from sufficiently fast uniform samples. The practical condition is $f_s>2f_{\max }$, with an anti-aliasing filter before sampling; otherwise distinct continuous frequencies produce identical samples. Ideal reconstruction uses shifted sinc functions. Critical-rate equality needs an appropriate signal class and can fail for unrestricted edge-frequency sinusoids with unknown phase. Sampling fast enough prevents aliasing, but does not remove thermal noise. This distinction covers the source's unspecified use of “Nyquist's theorem”.^[ref]